IKEA · Kids' Furniture
How to assemble IKEA TROFAST Wall Storage
Step-by-step IKEA TROFAST Wall Storage assembly: 15 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-444137-10).
- 15 illustrated steps
- 13 steps in the manual
- 2:29 video
- 99×21×30 cm
What you need
Tools
- Phillips screwdriver
- Allen key (included)
- Spirit level
You’ll need: a Phillips screwdriver, a pencil and a spirit level. The Allen key (100006) is included.
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 100349 | 16× |
| 101350 | 16× |
| 100229/100232 | 16× |
| 115753 | 2× |
| 103693 | 2× |
Step-by-step assembly
Step 1
Screw a box rail onto each of the 4 panels — 2 per panel.
1 screw (100349) per rail. Check which way round the rails go — see the manual, step 1.
Step 2
Turn the 2 dividers over and screw on 4 more rails.
1 screw (100349) per rail.
Step 3
Screw a wall bracket (115753) onto each side panel.
2 screws (100349) per bracket, in the corner next to the top rail.
Step 4
Push 4 dowels (101350) into a long panel. Fit the dividers to it.
Stand the dividers on their front edges, then press the panel on.
Step 5
Fix the panel to the dividers with 4 screws (100229).
Tighten with the Allen key.
Step 6
Push 4 dowels into the other long panel and fit it.
Step 7
Fix it with 4 screws (100229) and the Allen key.
Step 8
Push 8 dowels (101350) into the ends of the long panels.
2 in each end.
Step 9
Fit the two side panels onto the ends.
The wall brackets go at the back edge, next to the top panel.
Step 10
Fix each side with 4 screws (100229) and the Allen key.
8 screws in all.
Step 11
Stand the unit up.
Step 12 · manual step 11
Hold it against the wall, level it and mark the 2 bracket holes.
Two people. Mark through the holes in the brackets with a pencil.
Step 13 · manual step 12
Move it away. Drive 2 screws into the wall at the marks.
Wall screws are not included — use round-head screws, not countersunk.
Step 14 · manual step 13
Hang it on the screws and fit the 2 plates (103693) in the brackets.
Adjust it sideways and up/down, then tighten the screws with the screwdriver.
Step 15 · manual step 13
Press the 2 covers (115754) onto the brackets.
Tips & safety
- Use wall screws that suit your wall. Screws and plugs are not included. Use round-head screws, not countersunk — if unsure, ask a specialist.
- Hanging it above a TROFAST frame? Leave at least 55 cm (21 3/4") between the frame and the wall storage — manual p. 13.
Official instructions
This guide follows IKEA’s official assembly instructions (AA-444137-10). Keep the printed manual to hand — if anything differs, the manual is right.
