IKEA · Kids' Furniture

How to assemble IKEA SUNDVIK Children's Table

Step-by-step IKEA SUNDVIK Children's Table assembly: 10 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-1462280-1).

  • 10 illustrated steps
  • 5 steps in the manual
  • 1:53 video
  • 76×50×48 cm cm
IKEA SUNDVIK Children's Table, assembled

What you need

Tools

  • Flat-head screwdriver
  • Phillips screwdriver
  • Spanner (included)

Hardware in the box

Part no. (as printed in the manual)Qty
1114514×
1095728×
10904916×
1007164×
1008294×
1211214×
1103084×

Step-by-step assembly

  1. Step 1: Screw a corner bracket (110308) onto each end of the long rails. — IKEA SUNDVIK assembly

    Step 1

    Screw a corner bracket (110308) onto each end of the long rails.

    2 screws (109049) per bracket — 8 in total.

  2. Step 2: Stand the rails on edge and fit the short rails onto the brackets. — IKEA SUNDVIK assembly

    Step 2

    Stand the rails on edge and fit the short rails onto the brackets.

    The holes in the rail edges face up — see the detail in step 2.

  3. Step 3: Fix the short rails with 8 screws (109049). — IKEA SUNDVIK assembly

    Step 3 · manual step 2

    Fix the short rails with 8 screws (109049).

    2 screws into each bracket.

  4. Step 4: Lay the tabletop face down on the cardboard and put the frame on it. — IKEA SUNDVIK assembly

    Step 4 · manual step 3

    Lay the tabletop face down on the cardboard and put the frame on it.

  5. Step 5: Screw the frame to the tabletop with 8 screws (109572). — IKEA SUNDVIK assembly

    Step 5 · manual step 3

    Screw the frame to the tabletop with 8 screws (109572).

    Down through the holes in the rail edges, 2 per rail.

  6. Step 6: Push a barrel nut (121121) into the hole in the top of each leg. — IKEA SUNDVIK assembly

    Step 6 · manual step 4

    Push a barrel nut (121121) into the hole in the top of each leg.

    Turn the slot with a flat screwdriver so it lines up with the side hole.

  7. Step 7: Screw a threaded rod (111451) into each leg by hand. — IKEA SUNDVIK assembly

    Step 7 · manual step 4

    Screw a threaded rod (111451) into each leg by hand.

    It goes in through the side hole and into the barrel nut.

  8. Step 8: Fit the legs into the corners of the frame. — IKEA SUNDVIK assembly

    Step 8 · manual step 5

    Fit the legs into the corners of the frame.

    The threaded rod goes through the hole in the corner bracket.

  9. Step 9: Fit a washer (100829) and a nut (100716) on each rod. — IKEA SUNDVIK assembly

    Step 9 · manual step 5

    Fit a washer (100829) and a nut (100716) on each rod.

    Tighten the nuts with the adjustable wrench.

  10. Step 10: Turn the table upright. — IKEA SUNDVIK assembly

    Step 10 · manual step 5

    Turn the table upright.

Tips & safety

  • Assemble on the cardboard from the box. The manual shows working on a soft surface so the tabletop doesn’t get scratched.
  • Not sure about a step, or a part is missing? The manual says to contact your IKEA store.

Official instructions

This guide follows IKEA’s official assembly instructions (AA-1462280-1). Keep the printed manual to hand — if anything differs, the manual is right.

Open the official PDF manual

More guides: Kids' Furniture