IKEA · Kids' Furniture
How to assemble IKEA SUNDVIK Children's Chair
Step-by-step IKEA SUNDVIK Children's Chair assembly: 10 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-1462260-3).
- 10 illustrated steps
- 6 steps in the manual
- 1:47 video
- 34×32×56 cm
What you need
Tools
- Phillips screwdriver
- Allen key (included)
You’ll need a Phillips screwdriver.
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 100219 | 6× |
| 101350 | 4× |
| 109578 | 4× |
Step-by-step assembly
Step 1
Push 4 wooden dowels (101350) into the backrest panel.
2 in each end.
Step 2 · manual step 1
Lay a side frame flat and fit the backrest into the long leg.
The dowels go into the holes at the top of the long leg.
Step 3 · manual step 2
Fit the two seat rails into the side frame.
Their dowels are already fitted. Check which way the holes face — see the detail in step 2.
Step 4 · manual step 3
Place the second side frame on top.
The dowels go into the holes in its legs.
Step 5 · manual step 4
Fasten it with 3 bolts (100219) and the Allen key.
Through the legs into the backrest and both seat rails.
Step 6 · manual step 4
Turn the chair over.
Step 7 · manual step 5
Fasten the other side with 3 more bolts (100219).
Use the Allen key.
Step 8 · manual step 6
Put the seat face-down on a table and set the chair upside down on it.
The backrest hangs over the edge of the table.
Step 9 · manual step 6
Fix the seat with 4 screws (109578).
Use the Phillips screwdriver. 2 screws through each seat rail.
Step 10 · manual step 6
Turn the chair upright.
Tips & safety
- Step 6 is easiest on a table. The manual lays the chair upside down on a table so the backrest can hang over the edge.
- Not sure about a step, or a part is missing? The manual says to contact your IKEA store.
Official instructions
This guide follows IKEA’s official assembly instructions (AA-1462260-3). Keep the printed manual to hand — if anything differs, the manual is right.
