How to assemble IKEA STRANDMON Children's Armchair

Step-by-step assembly

1. 

   Step 1

   Screw the 2 threaded studs (100016) into the back.

   Lay the back face-up on a soft surface. Screw them in by hand — 30 mm stays out.

   ▶ Watch this step (0:16)

2. 

   Step 2

   Lower the seat onto the 2 studs.

   The open underside of the seat faces you.

   ▶ Watch this step (0:23)

3. 

   Step 3

   Fit a washer (100829) and a nut (100710) on each stud.

   Tighten the nuts with the spanner (100089).

   ▶ Watch this step (0:30)

4. 

   Step 4

   Screw a hook (150022) onto each side unit with screw 101084.

   One hook and one screw per side. Use the Phillips screwdriver.

   ▶ Watch this step (0:38)

5. 

   Step 5

   Lay the chair on its side.

   ▶ Watch this step (0:46)

6. 

   Step 6 · manual step 5

   Hook the first side unit into the slot on the back.

   Lower it on, then slide it towards the back until the hook catches.

   ▶ Watch this step (0:51)

7. 

   Step 7 · manual step 6

   Fit 2 bolts (120924) with washers (100829) through the seat frame.

   Screw them in by hand.

   ▶ Watch this step (0:59)

8. 

   Step 8 · manual step 7

   Tighten both bolts with the spanner (100089).

   First check: the top of the side unit must sit flush with the back — no gap.

   ▶ Watch this step (1:08)

9. 

   Step 9 · manual step 8

   Turn the chair over onto the fitted side.

   ▶ Watch this step (1:14)

10. 

    Step 10 · manual step 8

    Hook the second side unit into the slot on the back.

    Lower it on, then slide it towards the back until the hook catches.

    ▶ Watch this step (1:20)

11. 

    Step 11 · manual step 9

    Fit 2 bolts (120924) with washers (100829) on this side.

    Screw them in by hand.

    ▶ Watch this step (1:28)

12. 

    Step 12 · manual step 10

    Tighten both bolts with the spanner (100089).

    Again check that the side unit sits flush with the top of the back.

    ▶ Watch this step (1:36)

13. 

    Step 13 · manual step 11

    Screw the 4 legs (191111) into the corners of the seat frame.

    Turn them in by hand until tight.

    ▶ Watch this step (1:42)

14. 

    Step 14 · manual step 11

    Stand the chair on its legs.

    ▶ Watch this step (1:51)