How to assemble IKEA SMÅGÖRA Wardrobe

Step-by-step assembly

1. 

   Step 1

   Screw 10 cam bolts (118331) into the two side panels.

   Lay both sides on a rug, inner face up — 5 bolts in each.

   ▶ Watch this step (0:20)

2. 

   Step 2

   Tap 4 glides (153548) into the bottom ends with a hammer.

   ▶ Watch this step (0:27)

3. 

   Step 3 · manual step 3–4

   Push 4 dowels into the top and bottom panels, 4 cam bolts into the rails.

   Dowels 101345 in the front edges; cam bolts 118331 in the two curved rails.

   ▶ Watch this step (0:32)

4. 

   Step 4 · manual step 5–6

   Fit each curved rail onto its panel and lock it with 2 cam locks.

   Cam locks 118137 — turn clockwise with the flat-head screwdriver.

   ▶ Watch this step (0:40)

5. 

   Step 5 · manual step 7

   Push 10 dowels (101345) into the ends of the two panels.

   ▶ Watch this step (0:48)

6. 

   Step 6 · manual step 8

   Stand both panels on their back edge. Screw in 4 cam bolts (118331).

   Curved rails at the top.

   ▶ Watch this step (0:54)

7. 

   Step 7 · manual step 9–10

   Lay the back board between them and push both ends on. Lock it with 4 cam locks.

   Cam locks 118137.

   ▶ Watch this step (1:01)

8. 

   Step 8 · manual step 11

   Push the first side panel onto the ends.

   Bolts and dowels go into the holes.

   ▶ Watch this step (1:09)

9. 

   Step 9 · manual step 12

   Lock the side with 5 cam locks, then tip the frame onto that side.

   Cam locks 118137, turned clockwise.

   ▶ Watch this step (1:15)

10. 

    Step 10 · manual step 13

    Slide the back panel down into the grooves.

    The back panel comes folded in two — see the manual, step 13.

    ▶ Watch this step (1:24)

11. 

    Step 11 · manual step 14

    Lay the second side panel on top.

    ▶ Watch this step (1:30)

12. 

    Step 12 · manual step 15

    Lock the second side with 5 cam locks (118137).

    ▶ Watch this step (1:37)

13. 

    Step 13 · manual step 16

    Click 6 connectors (10095326 + 10095315) into the back panel.

    3 along each edge of the middle board.

    ▶ Watch this step (1:42)

14. 

    Step 14 · manual step 16

    Turn it onto its back, then raise it upright with two people.

    ▶ Watch this step (1:48)

15. 

    Step 15 · manual step 17

    Screw 2 wall brackets (106989) under the top panel.

    Screw 109049 with a washer (100823) in each.

    ▶ Watch this step (1:56)

16. 

    Step 16 · manual step 18–22

    Put it against the wall and screw both brackets to the wall.

    Screws 109048 + washers 100823. Mark, drill and choose plugs (121714) for your wall — see steps 18–21.

    ▶ Watch this step (2:02)

17. 

    Step 17 · manual step 23–24

    Screw 4 shelf supports (114929) to the sides, push in 4 shelf pins (113301).

    Screws 116637. Use the holes shown in the manual, step 23.

    ▶ Watch this step (2:10)

18. 

    Step 18 · manual step 25–26

    Lay in both shelves and screw on the 4 shelf locks (119985).

    Screws 116637 — see the manual, step 26, for where they go.

    ▶ Watch this step (2:18)

19. 

    Step 19 · manual step 27–28

    Screw on the 2 rail holders (118266) and drop in the clothes rail.

    One screw (113287) per holder.

    ▶ Watch this step (2:26)

20. 

    Step 20 · manual step 29

    Screw 3 hinge plates (109221) onto each side.

    2 screws (113287) per plate.

    ▶ Watch this step (2:33)

21. 

    Step 21 · manual step 30

    Screw 3 hinges (109338) onto each door.

    Doors face-down. 2 screws (113287) per hinge.

    ▶ Watch this step (2:39)

22. 

    Step 22 · manual step 31

    Clip each hinge onto its mounting plate, then tighten the screw.

    Left door on the left side, right door on the right side.

    ▶ Watch this step (2:46)

23. 

    Step 23 · manual step 32–33

    Fit a knob (190855) on each door and press in the 4 bumpers (115339).

    Knob bolt 112891 + nut 115981. Then close the doors.

    ▶ Watch this step (2:53)