IKEA · Kids' Furniture
How to assemble IKEA GULLIVER Changing Table
Step-by-step IKEA GULLIVER Changing Table assembly: 16 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2103796-2).
- 16 illustrated steps
- 15 steps in the manual
- 2:24 video
- 89×56×100 cm cm
What you need
Tools
- Flat-head screwdriver
- Allen key (included)
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 123756 | 12× |
| 101350 | 16× |
| 101345 | 8× |
| 101375 | 24× |
| 100514 | 12× |
Step-by-step assembly
Step 1
Push 2 dowels (101375) into each end of the 2 grooved rails.
Use the thin 101375 dowels — 8 for this frame.
Step 2
Stand both rails in the holes of one board.
Check the orientation shown in the manual, step 2.
Step 3
Slide the panel down into the grooves.
Step 4
Press the other board onto the rails.
Step 5
Push 4 dowels (101350) into the ends of both boards.
This frame, with the tall boards, is the changing top.
Step 6
Build 2 more frames: dowels (101375) in the rail ends.
2 in each end — 16 for both frames.
Step 7 · manual step 7–9
Assemble both frames the same way.
Rails into a board, panel down the grooves, other board on top. Panel side: see manual step 8.
Step 8 · manual step 10
Push 6 dowels (101350) into the rails of the 3 frames.
2 per frame, on the side facing the end frame.
Step 9 · manual step 10
Fit the 3 frames onto the end frame.
Tall-board frame at the top end. Panel side: see the manual, step 10.
Step 10 · manual step 11
Insert 6 barrel nuts (100514), then tighten 6 bolts (123756).
Allen key 100001. Line up the barrel nuts with a flat screwdriver.
Step 11 · manual step 12
Push 4 dowels (101345) into each rail.
2 in each end — 8 in total.
Step 12 · manual step 13
Slide both rails into the end frame at the top.
They form the rim around the changing top.
Step 13 · manual step 14
Push 6 dowels (101350) into the other side of the frames.
Step 14
Fit the second end frame.
Step 15
Insert 6 barrel nuts (100514) and tighten 6 bolts (123756).
Allen key 100001.
Step 16
Stand the changing table upright.
Tips & safety
- Work on a soft surface. The manual shows the parts laid on a rug so they don’t get scratched.
- Not sure about a step? Check the manual or contact IKEA — the manual shows this on page 2.
Official instructions
This guide follows IKEA’s official assembly instructions (AA-2103796-2). Keep the printed manual to hand — if anything differs, the manual is right.
