IKEA · Dressers & Drawer Units

How to assemble IKEA VIHALS 6-Drawer Dresser

Step-by-step IKEA VIHALS 6-Drawer Dresser assembly: 23 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2311875-6).

  • 23 illustrated steps
  • 30 steps in the manual
  • 3:29 video
  • 70×47×120 cm cm
IKEA VIHALS 6-Drawer Dresser, assembled

What you need

Tools

  • Flat-head screwdriver
  • Phillips screwdriver
  • Hammer
  • Allen key (included)
  • Drill (for wall fixing)

You’ll need: flat-head and Phillips screwdrivers, a hammer, a pencil, and a drill (8 mm or 3 mm bit, depending on the wall) for the wall fixing. The Allen key is included.

Hardware in the box

Part no. (as printed in the manual)Qty
1004888136×
100779824×
1013458×
1517052×
1517062×
1461132×
100611784×
14571824×
11903024×
14611448×
1095722×
100872232×
1090491×
1008232×
1069891×

Step-by-step assembly

  1. Step 1: Screw the cabinet runners onto the inside of both sides. — IKEA VIHALS assembly

    Step 1

    Screw the cabinet runners onto the inside of both sides.

    6 runners per side, 3 screws (10048881) each. Mind the IKEA CL / CR marks.

  2. Step 2: Press the 4 feet (10061178) into the bottom panel, then turn it over. — IKEA VIHALS assembly

    Step 2

    Press the 4 feet (10061178) into the bottom panel, then turn it over.

  3. Step 3: Stand up the side with the lock fitting and hang the bottom on. — IKEA VIHALS assembly

    Step 3 · manual step 3–4

    Stand up the side with the lock fitting and hang the bottom on.

    Then hang the other side on. Pins go into the keyholes — press each panel down until it clicks.

  4. Step 4: Lay in the metal rail (10090743) and fix it with 2 screws (146113). — IKEA VIHALS assembly

    Step 4 · manual step 5–6

    Lay in the metal rail (10090743) and fix it with 2 screws (146113).

  5. Step 5: Push 8 dowels (101345) into the back panels, then slide in the first two. — IKEA VIHALS assembly

    Step 5 · manual step 7–8

    Push 8 dowels (101345) into the back panels, then slide in the first two.

    Slide them into the grooves from the open end, all the way down to the bottom panel.

  6. Step 6: Slide in the narrow back piece, then the last back panel. — IKEA VIHALS assembly

    Step 6 · manual step 9

    Slide in the narrow back piece, then the last back panel.

    The narrow piece leaves room for the lock fitting.

  7. Step 7: Hang the top onto the pins and press it down until it clicks. — IKEA VIHALS assembly

    Step 7 · manual step 10

    Hang the top onto the pins and press it down until it clicks.

  8. Step 8: Pin the back to the metal rail. — IKEA VIHALS assembly

    Step 8 · manual step 11

    Pin the back to the metal rail.

    2 sleeves (151706) through the back, then 2 pins (151705) into them.

  9. Step 9: Tighten 4 bolts (10077982) in the corners with the Allen key. — IKEA VIHALS assembly

    Step 9 · manual step 12

    Tighten 4 bolts (10077982) in the corners with the Allen key.

  10. Step 10: Stand the dresser up. — IKEA VIHALS assembly

    Step 10 · manual step 13

    Stand the dresser up.

  11. Step 11: Fold out the anchor plate on the lock fitting at the back. — IKEA VIHALS assembly

    Step 11 · manual step 13

    Fold out the anchor plate on the lock fitting at the back.

    Then use the flat screwdriver as shown in the manual, step 13.

  12. Step 12: Slide in the wall bracket (106989) and screw it to the side. — IKEA VIHALS assembly

    Step 12 · manual step 14

    Slide in the wall bracket (106989) and screw it to the side.

    1 screw (109049) with a washer (100823).

  13. Step 13: Mark the 2 holes on the wall, pull the dresser away, drill and plug. — IKEA VIHALS assembly

    Step 13 · manual step 15–16

    Mark the 2 holes on the wall, pull the dresser away, drill and plug.

    Plugs 10087223 suit most solid and hollow walls; in solid wood use a 3 mm bit and no plug — see the manual, page 17.

  14. Step 14: Push the dresser back and screw it to the wall with 2 screws (109572). — IKEA VIHALS assembly

    Step 14 · manual step 17–18

    Push the dresser back and screw it to the wall with 2 screws (109572).

    One through the anchor plate (spacers 10083942 if needed), one through the wall bracket with a washer (100823).

  15. Step 15: Drawer: lay the front face-down and hang both sides on. — IKEA VIHALS assembly

    Step 15 · manual step 19

    Drawer: lay the front face-down and hang both sides on.

    Press them down until they click. Each drawer size has its own panels.

  16. Step 16: Slide in the bottom, fit the wire (10040242), then slide on the back. — IKEA VIHALS assembly

    Step 16 · manual step 20–22

    Slide in the bottom, fit the wire (10040242), then slide on the back.

    The wire goes on the inside face of the back — see the manual, step 21.

  17. Step 17: Push in 4 connectors (145718) and lock them with 4 cam locks (119030). — IKEA VIHALS assembly

    Step 17 · manual step 23–24

    Push in 4 connectors (145718) and lock them with 4 cam locks (119030).

  18. Step 18: Turn the drawer over and screw on the runners DL / DR. — IKEA VIHALS assembly

    Step 18 · manual step 25

    Turn the drawer over and screw on the runners DL / DR.

    3 screws (146114) each.

  19. Step 19: Fit the handle (10071494) with 2 screws (146114) from the inside. — IKEA VIHALS assembly

    Step 19 · manual step 26–27

    Fit the handle (10071494) with 2 screws (146114) from the inside.

  20. Step 20: Build the other 5 drawers the same way. — IKEA VIHALS assembly

    Step 20 · manual step 19–27

    Build the other 5 drawers the same way.

    One tall, two medium and three low drawers in total.

  21. Step 21: Slide the tall drawer into the bottom runners. — IKEA VIHALS assembly

    Step 21 · manual step 28

    Slide the tall drawer into the bottom runners.

    Tilt it so the wheels drop in behind the runner wheels — see the manual, step 28.

  22. Step 22: Slide in the two medium drawers. — IKEA VIHALS assembly

    Step 22 · manual step 29

    Slide in the two medium drawers.

    Only one drawer opens at a time — that’s the lock function.

  23. Step 23: Slide the three low drawers into the top runners. — IKEA VIHALS assembly

    Step 23 · manual step 30

    Slide the three low drawers into the top runners.

Tips & safety

  • Always fix the dresser to the wall. Children have died from furniture tip-over. The screws and plugs suit most walls; in solid wood use the screws without plugs. If unsure, ask a professional.
  • Never open more than one drawer at a time. Put the heaviest things in the lowest drawers. Never put a TV on top, and never let children climb or hang on the drawers.
  • Need to take the drawers out? Release the lock fitting first — see the last page of the manual.

Official instructions

This guide follows IKEA’s official assembly instructions (AA-2311875-6). Keep the printed manual to hand — if anything differs, the manual is right.

Open the official PDF manual

More guides: Dressers & Drawer Units