How to assemble IKEA STORKLINTA Nightstand with 1 Drawer

Step-by-step assembly

1. 

   Step 1

   Screw the runners onto both side panels — 6 screws (146114).

   Runner CL on one side, CR on the other, 3 screws each.

   ▶ Watch this step (0:18)

2. 

   Step 2 · manual step 2–3

   Screw 4 cam bolts into the sides; push 4 dowels into the bottom panel.

   2 bolts per side. 2 dowels in each end of the bottom panel.

   ▶ Watch this step (0:26)

3. 

   Step 3 · manual step 4–5

   Press the bottom panel onto one side and lock 2 cam locks (119252).

   Use 119252 here — not the 120076 drawer cam locks. Turn them clockwise.

   ▶ Watch this step (0:33)

4. 

   Step 4 · manual step 6

   Turn the frame onto its front edges and fit the second side.

   The bolts and dowels go into the holes in the bottom panel.

   ▶ Watch this step (0:42)

5. 

   Step 5 · manual step 7

   Lock the second side with 2 cam locks (119252), turned clockwise.

   ▶ Watch this step (0:50)

6. 

   Step 6 · manual step 8–9

   Screw 2 brackets (102553) to the plinth rail, then fix it to the sides.

   4 screws (105248): 2 into the rail, 2 into the side panels. Bracket hole points up.

   ▶ Watch this step (0:56)

7. 

   Step 7 · manual step 10

   Press in the 2 L-shaped feet (10101849) and 2 straight ones (158568).

   L-shaped at the plinth corners, straight ones at the back.

   ▶ Watch this step (1:04)

8. 

   Step 8 · manual step 11–12

   Slide the back panel into the grooves; fix it with 2 rivets.

   Push in rivet 10050769, then press its pin 10050771 in.

   ▶ Watch this step (1:10)

9. 

   Step 9 · manual step 13

   Stand the frame up; push 6 dowels (101345) into the side tops.

   ▶ Watch this step (1:19)

10. 

    Step 10 · manual step 14–15

    Screw 4 cam bolts (118331) into the top, then lower it on.

    ▶ Watch this step (1:26)

11. 

    Step 11 · manual step 16

    Lock the top with 4 cam locks (119252), turned clockwise.

    ▶ Watch this step (1:34)

12. 

    Step 12 · manual step 17

    Push 2 clips (10093081) into the sides, then press the inserts in.

    One on each side, at the front by the runner. Inserts: 10093082.

    ▶ Watch this step (1:40)

13. 

    Step 13

    Now the drawer.

    Bag 2.

    ▶ Watch this step (1:46)

14. 

    Step 14 · manual step 18–19

    Front face-down: 4 cam bolts in the front, 4 dowels in the sides.

    Cam bolts 118331, dowels 101345.

    ▶ Watch this step (1:49)

15. 

    Step 15 · manual step 20–21

    Stand the sides on the front and lock with 4 cam locks (120076).

    ▶ Watch this step (1:56)

16. 

    Step 16 · manual step 22–23

    Slide the drawer bottom down the grooves, then put the back on.

    ▶ Watch this step (2:03)

17. 

    Step 17 · manual step 24–25

    Push in 4 pegs (145718), then lock 4 cam locks (120076) in the back.

    ▶ Watch this step (2:10)

18. 

    Step 18 · manual step 26

    Turn the drawer over and screw on its runners — 6 screws (146114).

    Match the drawer runners to the CL / CR runners in the frame.

    ▶ Watch this step (2:17)

19. 

    Step 19 · manual step 27

    Tilt the drawer onto the runners and push it in.

    ▶ Watch this step (2:25)