IKEA · Dressers & Drawer Units

How to assemble IKEA BESTÅ Drawer Frame

Step-by-step IKEA BESTÅ Drawer Frame assembly: 10 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-1883075-4).

  • 10 illustrated steps
  • 14 steps in the manual
  • 1:55 video
  • 60×40×15 cm
IKEA BESTÅ Drawer Frame, assembled

What you need

Tools

  • Flat-head screwdriver
  • Phillips screwdriver

Hardware in the box

Part no. (as printed in the manual)Qty
1304494×
1190304×
1392512×
1331852×
1471912×
1313692×

Step-by-step assembly

  1. Step 1: Slide the 2 metal profiles (131369) onto the ends of the back panel. — IKEA BESTÅ assembly

    Step 1

    Slide the 2 metal profiles (131369) onto the ends of the back panel.

    Lay the back panel flat on the rug.

  2. Step 2: Push both side panels into the profiles. — IKEA BESTÅ assembly

    Step 2

    Push both side panels into the profiles.

    The 3 holes near one edge go up, at the open end.

  3. Step 3: Slide the bottom panel down into the grooves. — IKEA BESTÅ assembly

    Step 3

    Slide the bottom panel down into the grooves.

    Push it all the way down to the back panel.

  4. Step 4: Next: the drawer front (sold separately). — IKEA BESTÅ assembly

    Step 4

    Next: the drawer front (sold separately).

    Tall front (picture at step 4): follow steps 4–8. Lower front: steps 9–13 — shown here.

  5. Step 5: Screw 4 cam bolts (130449) into the back of the front. — IKEA BESTÅ assembly

    Step 5 · manual step 9–10

    Screw 4 cam bolts (130449) into the back of the front.

    Front face-down on the rug. Step 9 = lowest drawer in the frame, step 10 = higher up — the holes differ.

  6. Step 6: Turn the front over and lower it onto the sides. — IKEA BESTÅ assembly

    Step 6 · manual step 11

    Turn the front over and lower it onto the sides.

    The cam bolts go into the holes in the front edges of the sides.

  7. Step 7: Insert 4 cam locks (119030) and turn them clockwise. — IKEA BESTÅ assembly

    Step 7 · manual step 12

    Insert 4 cam locks (119030) and turn them clockwise.

    2 in each side. Use the flat-head screwdriver.

  8. Step 8: Press a cap (139251) into the remaining hole in each side. — IKEA BESTÅ assembly

    Step 8 · manual step 13

    Press a cap (139251) into the remaining hole in each side.

  9. Step 9: Press a fitting (147191) into the 2 holes on the outside of each side. — IKEA BESTÅ assembly

    Step 9 · manual step 14

    Press a fitting (147191) into the 2 holes on the outside of each side.

    To mount the drawer, continue with the separate BESTÅ manual shown on the last page.

  10. Step 10: Stand the drawer upright — done. — IKEA BESTÅ assembly

    Step 10

    Stand the drawer upright — done.

Tips & safety

  • The drawer front is sold separately. Its height decides the path: tall front → steps 4–8, lower fronts → steps 9–13. Both finish with step 14.
  • Tall front? Fit the 2 round fittings (133185) first. Manual step 5 — they press into the large holes in the back of the front.
  • Mounting the drawer in the frame? The last page of this manual points to a separate BESTÅ manual (drawer runners) for that.

Official instructions

This guide follows IKEA’s official assembly instructions (AA-1883075-4). Keep the printed manual to hand — if anything differs, the manual is right.

Open the official PDF manual

More guides: Dressers & Drawer Units