IKEA · Chairs & Stools
How to assemble IKEA VOXLÖV Chair
Step-by-step IKEA VOXLÖV Chair assembly: 15 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2208122-4).
- 15 illustrated steps
- 11 steps in the manual
- 2:15 video
- 49×54×80 cm
What you need
Tools
- Phillips screwdriver
- Allen key (included)
You’ll need: a Phillips screwdriver.
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 10068913 | 4× |
| 10068854 | 2× |
| 10068745 | 4× |
| 10068855 | 2× |
| 109566 | 2× |
| 101350 | 4× |
Step-by-step assembly
Step 1
Push 4 dowels (101350) into the ends of the 2 curved rails.
One dowel in each end.
Step 2
Fit both rails onto one side frame.
The dowels go into the holes at the joints of the frame.
Step 3 · manual step 2
Fix each rail with a bolt (10068913).
Use the Allen key 100006 — screw them in fully, no gap under the head.
Step 4 · manual step 3
Lay the frame down flat, rails pointing up.
Step 5 · manual step 4
Turn the other side frame over onto the rails.
The dowels go into the holes in the frame.
Step 6 · manual step 5
Fix the frame to the rails with 2 bolts (10068913).
Allen key 100006 — screw them in fully.
Step 7
Stand the frame upright.
Step 8 · manual step 6
Fit the backrest onto the front of the posts.
Step 9 · manual step 7
Fix the backrest with 4 bolts (10068745).
Use 10068745 here, not the 10068854 bolts. Allen key 10083377.
Step 10 · manual step 8
Lay the chair on its back.
Step 11 · manual step 8
Slide the seat into the frame.
The brackets under the back of the seat go in between the back legs.
Step 12 · manual step 9
Fix the seat with 2 screws (109566).
Use the Phillips screwdriver.
Step 13 · manual step 10
Fix the seat with 2 bolts (10068854) and 2 cap nuts (10068855).
Hold the nut with Allen key 100002 and tighten the bolt with 10083377.
Step 14 · manual step 11
Stand the chair up.
Step 15 · manual step 11
Tighten all 10 bolts firmly.
Go round every bolt with the Allen keys once the chair stands.
Tips & safety
- Work on a soft surface. The manual shows assembly on a rug, so the bamboo doesn’t get scratched.
- Tighten all 10 bolts — step 11. Go round every bolt once more after assembly. Questions or missing parts? Contact IKEA.
Official instructions
This guide follows IKEA’s official assembly instructions (AA-2208122-4). Keep the printed manual to hand — if anything differs, the manual is right.
