How to assemble IKEA ULRIKSBERG Armchair

Step-by-step assembly

1. 

   Step 1

   Stand the seat on its side edge on a rug.

   Check which way the seat faces — see the manual, step 1.

   ▶ Watch this step (0:16)

2. 

   Step 2 · manual step 1

   Lay one side frame onto the top edge of the seat.

   The holes in the legs line up with the seat.

   ▶ Watch this step (0:21)

3. 

   Step 3 · manual step 1

   Screw in 2 bolts (10006439) by hand.

   Leave them a little loose for now, as the manual shows.

   ▶ Watch this step (0:28)

4. 

   Step 4 · manual step 2

   Stand the chair upright.

   ▶ Watch this step (0:36)

5. 

   Step 5 · manual step 2

   Slide the backrest in from the open side.

   Its pin goes into the hole in the back leg.

   ▶ Watch this step (0:42)

6. 

   Step 6 · manual step 2

   Fix the backrest with 1 bolt (10006439) through the back leg.

   Hand-tight only.

   ▶ Watch this step (0:49)

7. 

   Step 7 · manual step 3

   Turn the chair over onto the side frame.

   The open side now faces up.

   ▶ Watch this step (0:56)

8. 

   Step 8 · manual step 3

   Place the second side frame on top.

   The backrest pin goes into the hole in its back leg.

   ▶ Watch this step (1:02)

9. 

   Step 9 · manual step 3

   Screw 1 bolt (10006439) into the backrest.

   Hand-tight only.

   ▶ Watch this step (1:09)

10. 

    Step 10 · manual step 4

    Screw 2 bolts (10006439) into the seat.

    Hand-tight only — they are tightened in step 6.

    ▶ Watch this step (1:16)

11. 

    Step 11 · manual step 5

    Stick a felt pad (102428) onto each of the 4 feet.

    ▶ Watch this step (1:23)

12. 

    Step 12 · manual step 6

    Stand the chair up on the floor.

    If a foot does not touch the floor, press down on the chair until all 4 stand flat.

    ▶ Watch this step (1:31)

13. 

    Step 13 · manual step 6

    Tighten all 6 bolts with the Allen key (108490).

    Each bolt head must sit flat against the leg.

    ▶ Watch this step (1:39)