IKEA · Chairs & Stools

How to Assemble IKEA TEODORES Chair

Step-by-step IKEA TEODORES chair assembly: 14 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-1968887-18).

  • 14 illustrated steps
  • 11 steps in the manual
  • 2:06 video
  • 46×54×80 cm
IKEA TEODORES Chair, assembled

What you need

Tools

  • Phillips screwdriver
  • Allen key (included)

You’ll need: a Phillips screwdriver and scissors. The two Allen keys are included.

Hardware in the box

Part no. (as printed in the manual)Qty
1001044×
101172924×
1217604×
1095442×
1393694×

Step-by-step assembly

  1. Step 1: Lay both frames down and click an insert onto each back post. — IKEA TEODORES assembly

    Step 1

    Lay both frames down and click an insert onto each back post.

    The inserts come joined — cut them apart with scissors first.

  2. Step 2: Stand the two frames up. — IKEA TEODORES assembly

    Step 2

    Stand the two frames up.

  3. Step 3: Screw 4 threaded spacers (10117292) into the inserts. — IKEA TEODORES assembly

    Step 3 · manual step 2

    Screw 4 threaded spacers (10117292) into the inserts.

    Use Allen key 108490. 2 in each frame, turned in all the way.

  4. Step 4: Lower the backrest onto the left frame. — IKEA TEODORES assembly

    Step 4 · manual step 3

    Lower the backrest onto the left frame.

  5. Step 5: Push the right frame into the backrest. — IKEA TEODORES assembly

    Step 5 · manual step 4

    Push the right frame into the backrest.

    The spacers slide into the channel in the side of the backrest.

  6. Step 6: Push the back crossbar up and fit 2 bolts (100104) by hand. — IKEA TEODORES assembly

    Step 6 · manual step 5

    Push the back crossbar up and fit 2 bolts (100104) by hand.

    Don’t tighten yet — leave a small gap under the heads.

  7. Step 7: Do the same at the front: crossbar up, 2 bolts (100104). — IKEA TEODORES assembly

    Step 7 · manual step 6

    Do the same at the front: crossbar up, 2 bolts (100104).

    Again, not fully tightened yet.

  8. Step 8: Fix the backrest with 2 screws (109544) from behind. — IKEA TEODORES assembly

    Step 8 · manual step 7

    Fix the backrest with 2 screws (109544) from behind.

    Use the long 109544 screws, not 121760. No power drill.

  9. Step 9: Now tighten all 4 bolts with Allen key 100001. — IKEA TEODORES assembly

    Step 9 · manual step 8

    Now tighten all 4 bolts with Allen key 100001.

    The heads must sit flush — no gap.

  10. Step 10: Hook the back of the seat under the backrest. — IKEA TEODORES assembly

    Step 10 · manual step 9

    Hook the back of the seat under the backrest.

    Slide it in from the front, tilted up.

  11. Step 11: Press the front of the seat down until the 4 pegs click in. — IKEA TEODORES assembly

    Step 11 · manual step 10

    Press the front of the seat down until the 4 pegs click in.

    Hold the backrest with one hand.

  12. Step 12: Turn the chair over onto a table, seat down. — IKEA TEODORES assembly

    Step 12 · manual step 11

    Turn the chair over onto a table, seat down.

  13. Step 13: Fit 4 plastic sleeves (139369) and 4 screws (121760). — IKEA TEODORES assembly

    Step 13 · manual step 11

    Fit 4 plastic sleeves (139369) and 4 screws (121760).

    Use the Phillips screwdriver by hand — no power drill.

  14. Step 14: Turn the chair upright. — IKEA TEODORES assembly

    Step 14 · manual step 11

    Turn the chair upright.

Tips & safety

  • Check the chair stands steady. All four feet must touch the floor — it should not rock (manual, step 8).

Official instructions

This guide follows IKEA's official assembly instructions (AA-1968887-18). Keep the printed manual to hand — if anything differs, the manual is right.

Open the official PDF manual

More chairs & stools guides