IKEA · Chairs & Stools
How to assemble IKEA STOCKHOLM Sofa
Step-by-step IKEA STOCKHOLM Sofa assembly: 8 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-730622-2).
- 8 illustrated steps
- 1 steps in the manual
- 1:33 video
- 211×93×83 cm
What you need
Tools
- Allen key (included)
You’ll need: the Allen key (100049) — it comes in the box.
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 111531 | 4× |
| 108383 | 4× |
Step-by-step assembly
Step 1
Lay the sofa on its back.
Work on a soft, clean surface so the fabric stays clean.
Step 2 · manual step 1
Check the info box: each leg has its own corner.
See how each leg is turned at its corner — manual page 3.
Step 3 · manual step 1
Fix the 2 back legs with a bolt (111531) and washer (108383).
Push the bolt through the leg and tighten with the Allen key.
Step 4 · manual step 1
Fix the 2 front legs the same way.
4 legs in total — one bolt and one washer each.
Step 5
Stand the sofa up on its legs.
Step 6
Place the 2 seat cushions.
Push them in at the back — see the info box on page 4.
Step 7
Put the 3 back cushions in place.
They rest on the seat cushions against the back frame.
Step 8
Add the 2 side cushions against the armrests.
Tips & safety
- Seat cushions: push, don’t pull Press them into place at the back by hand — the info box on page 4 shows the right and wrong way.
- Something missing or unclear? Contact your IKEA store before you continue — page 2 of the manual.
Official instructions
This guide follows IKEA’s official assembly instructions (AA-730622-2). Keep the printed manual to hand — if anything differs, the manual is right.
