IKEA · Chairs & Stools

How to assemble IKEA STEFAN Chair

Step-by-step IKEA STEFAN Chair assembly: 14 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-21977-11).

  • 14 illustrated steps
  • 9 steps in the manual
  • 2:14 video
  • 42×49×90 cm cm
IKEA STEFAN Chair, assembled

What you need

Tools

  • Phillips screwdriver
  • Allen key (included)

You’ll need a Phillips screwdriver and an awl.

Hardware in the box

Part no. (as printed in the manual)Qty
1043226×
10135014×
1226204×
1229254×

Step-by-step assembly

  1. Step 1: Press 2 brackets (122620) into each seat rail. — IKEA STEFAN assembly

    Step 1

    Press 2 brackets (122620) into each seat rail.

    Lay the two seat rails flat on a rug, holes facing up.

  2. Step 2: Push 4 dowels (101350) into a seat rail. — IKEA STEFAN assembly

    Step 2

    Push 4 dowels (101350) into a seat rail.

    Lay a side frame flat. Brackets must face as shown in the detail, step 2.

  3. Step 3: Fit it into the side frame at the back leg. — IKEA STEFAN assembly

    Step 3 · manual step 2

    Fit it into the side frame at the back leg.

  4. Step 4: Do the same with the other seat rail at the front leg. — IKEA STEFAN assembly

    Step 4 · manual step 3

    Do the same with the other seat rail at the front leg.

    4 more dowels (101350).

  5. Step 5: Push 6 dowels (101350) into the backrest and fit it. — IKEA STEFAN assembly

    Step 5 · manual step 4

    Push 6 dowels (101350) into the backrest and fit it.

    2 in each end of the top rail, 1 in each end of the middle rail.

  6. Step 6: Place the second side frame on top. — IKEA STEFAN assembly

    Step 6 · manual step 5

    Place the second side frame on top.

    The dowels go into its holes.

  7. Step 7: Fasten it with 3 bolts (104322) and the Allen key. — IKEA STEFAN assembly

    Step 7 · manual step 5

    Fasten it with 3 bolts (104322) and the Allen key.

  8. Step 8: Turn the chair over. — IKEA STEFAN assembly

    Step 8 · manual step 6

    Turn the chair over.

  9. Step 9: Fasten the other side with 3 more bolts (104322). — IKEA STEFAN assembly

    Step 9 · manual step 6

    Fasten the other side with 3 more bolts (104322).

    Use the Allen key.

  10. Step 10: Lay the seat face down on a table. — IKEA STEFAN assembly

    Step 10 · manual step 7

    Lay the seat face down on a table.

  11. Step 11: Set the frame upside down on the seat. — IKEA STEFAN assembly

    Step 11 · manual step 7

    Set the frame upside down on the seat.

    The backrest hangs over the edge of the table.

  12. Step 12: Line the seat up evenly with the legs. — IKEA STEFAN assembly

    Step 12 · manual step 8

    Line the seat up evenly with the legs.

    Same gap at the front and both sides — see the details in steps 7 and 8.

  13. Step 13: Fix the seat with 4 screws (122925). — IKEA STEFAN assembly

    Step 13 · manual step 9

    Fix the seat with 4 screws (122925).

    Pre-punch the holes with an awl, then screw through the brackets — Phillips screwdriver.

  14. Step 14: Turn the chair upright. — IKEA STEFAN assembly

    Step 14

    Turn the chair upright.

    Your STEFAN chair is ready.

Tips & safety

  • Work on a rug or the flattened box. The manual shows this so the parts don’t get scratched.
  • Missing a part or unsure about a step? The manual says: contact your IKEA store.

Official instructions

This guide follows IKEA’s official assembly instructions (AA-21977-11). Keep the printed manual to hand — if anything differs, the manual is right.

Open the official PDF manual

More guides: Chairs & Stools