IKEA · Chairs & Stools

How to assemble IKEA SMÖRKULL Office Chair with Armrests

Step-by-step IKEA SMÖRKULL Office Chair with Armrests assembly: 14 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2343080-5).

  • 14 illustrated steps
  • 9 steps in the manual
  • 2:20 video
  • 68×68×110 cm
IKEA SMÖRKULL Office Chair with Armrests, assembled

What you need

Tools

  • Allen key (included)

You’ll need: only the 2 Allen keys (124345 and 100092), included. A table to work on helps in steps 5–7.

Hardware in the box

Part no. (as printed in the manual)Qty
1286338×
1215018×
12289810×

Step-by-step assembly

  1. Step 1: Push the 5 legs into the hub of the base. — IKEA SMÖRKULL assembly

    Step 1

    Push the 5 legs into the hub of the base.

    The base lies upside down.

  2. Step 2: Fix each leg with 2 screws (122898) and the Allen key 124345. — IKEA SMÖRKULL assembly

    Step 2 · manual step 1

    Fix each leg with 2 screws (122898) and the Allen key 124345.

    10 screws in total.

  3. Step 3: Press the 5 casters into the legs until they click. — IKEA SMÖRKULL assembly

    Step 3 · manual step 2

    Press the 5 casters into the legs until they click.

  4. Step 4: Pull the protective cap off the top of the gas cylinder. — IKEA SMÖRKULL assembly

    Step 4 · manual step 3

    Pull the protective cap off the top of the gas cylinder.

    Recycle the cap.

  5. Step 5: Turn the base over onto its casters. — IKEA SMÖRKULL assembly

    Step 5 · manual step 4

    Turn the base over onto its casters.

  6. Step 6: Put the gas cylinder into the hole in the hub. — IKEA SMÖRKULL assembly

    Step 6 · manual step 4

    Put the gas cylinder into the hole in the hub.

  7. Step 7: Lay the seat upside down on a table. Place the armrests. — IKEA SMÖRKULL assembly

    Step 7 · manual step 5

    Lay the seat upside down on a table. Place the armrests.

    They are marked R and L — see the manual, step 5.

  8. Step 8: Fix each armrest with 4 screws (121501) and the Allen key 100092. — IKEA SMÖRKULL assembly

    Step 8 · manual step 5

    Fix each armrest with 4 screws (121501) and the Allen key 100092.

    8 screws in total.

  9. Step 9: Place the mechanism on the seat and fix it with 4 screws (128633). — IKEA SMÖRKULL assembly

    Step 9 · manual step 6

    Place the mechanism on the seat and fix it with 4 screws (128633).

    Use the Allen key 124345.

  10. Step 10: Place the backrest bar on the mechanism. — IKEA SMÖRKULL assembly

    Step 10 · manual step 7

    Place the backrest bar on the mechanism.

    The backrest hangs over the edge of the table.

  11. Step 11: Fix the bar with 4 screws (128633). — IKEA SMÖRKULL assembly

    Step 11 · manual step 7

    Fix the bar with 4 screws (128633).

    Tighten them firmly with the Allen key 124345.

  12. Step 12: Turn the seat over. — IKEA SMÖRKULL assembly

    Step 12 · manual step 8

    Turn the seat over.

  13. Step 13: Put the seat onto the gas cylinder. — IKEA SMÖRKULL assembly

    Step 13 · manual step 8

    Put the seat onto the gas cylinder.

    The top of the cylinder goes into the hole under the seat.

  14. Step 14: Sit down on the chair to press the seat firmly onto the cylinder. — IKEA SMÖRKULL assembly

    Step 14 · manual step 9

    Sit down on the chair to press the seat firmly onto the cylinder.

Tips & safety

  • Warning: gas cylinder Only trained personnel may replace or repair the seat height adjustment parts (manual p. 11–13).
  • Safety casters They brake automatically when no one is sitting in the chair, so it stays where you left it (manual p. 16).
  • Washable covers The seat and back covers come off for washing — see the manual, p. 20–28, to remove and refit them.

Official instructions

This guide follows IKEA’s official assembly instructions (AA-2343080-5). Keep the printed manual to hand — if anything differs, the manual is right.

Open the official PDF manual

More guides: Chairs & Stools