IKEA · Chairs & Stools
How to assemble IKEA SEGERÖN Armchair
Step-by-step IKEA SEGERÖN Armchair assembly: 7 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2310811-2).
- 7 illustrated steps
- 5 steps in the manual
- 1:31 video
- 65×62×76 cm
What you need
Tools
- Allen key (included)
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 10133266 | 4× |
| 113135 | 4× |
| 10135057 | 2× |
Step-by-step assembly
Step 1
Push the 2 connectors (10135057) into the back leg frame.
Push until the spring button clicks into the hole. Check the orientation in the manual, step 1.
Step 2
Lay the seat upside down on a rug.
It rests on the top of the backrest and the armrests.
Step 3 · manual step 2
Push the back leg frame into the two rear sockets.
The connectors slide into the sockets at the back corners of the seat.
Step 4 · manual step 3
Fix it with 2 bolts (10133266) and 2 washers (113135).
Tighten them with the Allen key (108490).
Step 5 · manual step 4
Push the front leg frame onto the two front sockets.
The leg tubes slide over the pins at the front corners.
Step 6 · manual step 5
Fix it with 2 bolts (10133266) and 2 washers (113135).
Tighten them with the Allen key (108490).
Step 7
Turn the chair the right way up.
Your SEGERÖN armchair is ready.
Tips & safety
- Assemble on a rug or the flattened box. Like the manual shows — it protects the cords and the frame from scratches.
- Not sure, or missing a part? The manual says: contact your IKEA store for help.
Official instructions
This guide follows IKEA’s official assembly instructions (AA-2310811-2). Keep the printed manual to hand — if anything differs, the manual is right.
