How to assemble IKEA RÖNNINGE Chair

Step-by-step assembly

1. 

   Step 1

   Fix 2 angle brackets (102646) to each side frame.

   One screw (105344) per bracket — Phillips screwdriver.

   ▶ Watch this step (0:16)

2. 

   Step 2

   Stand one side frame on its back leg, as shown.

   ▶ Watch this step (0:25)

3. 

   Step 3 · manual step 2

   Fit the back stretcher into the back leg.

   Holes facing as in the detail, step 2.

   ▶ Watch this step (0:30)

4. 

   Step 4 · manual step 3

   Fit the front stretcher into the front leg.

   ▶ Watch this step (0:36)

5. 

   Step 5 · manual step 4

   Fit the curved front seat rail.

   Check which way it curves — see the detail, step 4.

   ▶ Watch this step (0:42)

6. 

   Step 6 · manual step 5

   Fit the back seat rail.

   ▶ Watch this step (0:48)

7. 

   Step 7 · manual step 6

   Insert 4 barrel nuts (100514) into the cross pieces.

   Turn the slot with a flat screwdriver so the bolt hole lines up.

   ▶ Watch this step (0:54)

8. 

   Step 8 · manual step 6

   Fasten 4 bolts (123755) through the side frame.

   Use the Allen key. The bolt heads must sit flush.

   ▶ Watch this step (1:01)

9. 

   Step 9 · manual step 6

   Turn it over so the side frame lies flat.

   ▶ Watch this step (1:08)

10. 

    Step 10 · manual step 7

    Place the second side frame on top.

    The cross pieces go into its holes.

    ▶ Watch this step (1:13)

11. 

    Step 11 · manual step 8

    Insert 4 more barrel nuts (100514).

    Line up the slots with a flat screwdriver.

    ▶ Watch this step (1:21)

12. 

    Step 12 · manual step 8

    Fasten 4 bolts (123755) with the Allen key.

    Bolt heads flush with the wood.

    ▶ Watch this step (1:28)

13. 

    Step 13

    Stand the chair upright.

    ▶ Watch this step (1:35)

14. 

    Step 14 · manual step 9

    Attach the backrest with 4 bolts (10086345).

    Screw them in from behind with the Allen key.

    ▶ Watch this step (1:41)

15. 

    Step 15 · manual step 10

    Press down firmly on the frame, as shown.

    Keep all four legs on the floor.

    ▶ Watch this step (1:50)

16. 

    Step 16 · manual step 11

    Tighten all 8 bolts firmly with the Allen key.

    The bolt heads must sit flush with the wood.

    ▶ Watch this step (1:55)

17. 

    Step 17 · manual step 12

    Lay the seat face down on a table.

    ▶ Watch this step (2:02)

18. 

    Step 18 · manual step 12

    Set the chair upside down on the seat.

    The backrest hangs over the edge of the table.

    ▶ Watch this step (2:07)

19. 

    Step 19 · manual step 13

    Fix the seat with 4 screws (105344) through the brackets.

    Use the Phillips screwdriver.

    ▶ Watch this step (2:15)

20. 

    Step 20

    Turn the chair upright.

    Your RÖNNINGE chair is ready.

    ▶ Watch this step (2:24)