IKEA · Chairs & Stools

How to assemble IKEA RÅGRUND Chair with Towel Rack

Step-by-step IKEA RÅGRUND Chair with Towel Rack assembly: 13 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-844366-3).

  • 13 illustrated steps
  • 8 steps in the manual
  • 2:17 video
  • 40×47×140 cm
IKEA RÅGRUND Chair with Towel Rack, assembled

What you need

Tools

  • Phillips screwdriver
  • Allen key (included)

Hardware in the box

Part no. (as printed in the manual)Qty
13060822×
11054812×
1027206×

Step-by-step assembly

  1. Step 1: Screw 2 angle brackets (102720) onto each of the 2 rails. — IKEA RÅGRUND assembly

    Step 1

    Screw 2 angle brackets (102720) onto each of the 2 rails.

    4 screws (110548) — use the Phillips screwdriver.

  2. Step 2: Lay the 2 side frames on their backs and fit the rails between them. — IKEA RÅGRUND assembly

    Step 2

    Lay the 2 side frames on their backs and fit the rails between them.

    The brackets go on the inside, at the seat end.

  3. Step 3: Bolt the rails to the legs: 2 bolts (130608) at each end. — IKEA RÅGRUND assembly

    Step 3 · manual step 2

    Bolt the rails to the legs: 2 bolts (130608) at each end.

    8 bolts in total — tighten them with the Allen key.

  4. Step 4: Slide the seat in and fix it to the brackets with 4 screws (110548). — IKEA RÅGRUND assembly

    Step 4 · manual step 3

    Slide the seat in and fix it to the brackets with 4 screws (110548).

    Keep the seat pressed against the frame as you screw — see the detail in step 3.

  5. Step 5: Fit the bottom shelf and fix it with 4 bolts (130608). — IKEA RÅGRUND assembly

    Step 5 · manual step 4

    Fit the bottom shelf and fix it with 4 bolts (130608).

    One bolt through each leg.

  6. Step 6: Turn the chair upright. — IKEA RÅGRUND assembly

    Step 6 · manual step 4

    Turn the chair upright.

  7. Step 7: Build the towel rack: 3 rails between the 2 uprights. — IKEA RÅGRUND assembly

    Step 7 · manual step 5

    Build the towel rack: 3 rails between the 2 uprights.

    6 bolts (130608) — one through the upright into each rail end.

  8. Step 8: Lower the towel rack onto the chair, outside the back legs. — IKEA RÅGRUND assembly

    Step 8 · manual step 6

    Lower the towel rack onto the chair, outside the back legs.

    The manual shows two people for this step.

  9. Step 9: Fix it with 2 bolts (130608) on each side. — IKEA RÅGRUND assembly

    Step 9 · manual step 6

    Fix it with 2 bolts (130608) on each side.

    Use the Allen key.

  10. Step 10: Lay the chair on its back. — IKEA RÅGRUND assembly

    Step 10 · manual step 7

    Lay the chair on its back.

  11. Step 11: Tighten the 4 screws in the seat brackets. — IKEA RÅGRUND assembly

    Step 11 · manual step 7

    Tighten the 4 screws in the seat brackets.

    Phillips screwdriver — see the detail in the manual, step 7.

  12. Step 12: Fit the last 2 brackets (102720) under the back of the seat. — IKEA RÅGRUND assembly

    Step 12 · manual step 8

    Fit the last 2 brackets (102720) under the back of the seat.

    2 screws (110548) each — see the manual, step 8 for their exact position.

  13. Step 13: Stand the chair upright. — IKEA RÅGRUND assembly

    Step 13

    Stand the chair upright.

    Your RÅGRUND is ready.

Tips & safety

  • Get a helper to fit the towel rack. The manual shows two people in step 6: one holds the rack, the other bolts it on.
  • Missing a part or unsure about a step? The manual says: contact your IKEA store.

Official instructions

This guide follows IKEA’s official assembly instructions (AA-844366-3). Keep the printed manual to hand — if anything differs, the manual is right.

Open the official PDF manual

More guides: Chairs & Stools