IKEA · Chairs & Stools
How to assemble IKEA OSKARSHAMN Wing Chair
Step-by-step IKEA OSKARSHAMN Wing Chair assembly: 11 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2522784-1).
- 11 illustrated steps
- 7 steps in the manual
- 1:47 video
- 83×83×101 cm cm

What you need
Tools
- Spanner (included)
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 100854 | 4× |
| 100712 | 4× |
Step-by-step assembly

Step 1
Fit the 2 rear legs (10081603).
Chair on its back on a soft surface. The 2 studs of each leg go through the holes in the frame.

Step 2 · manual step 1
Fit a washer (100854) and a nut (100712) on one stud of each leg.
Turn the nuts on by hand only.

Step 3 · manual step 2
Fit the other 2 washers and nuts the same way.
Still by hand — the nuts get tightened later (step 6).

Step 4 · manual step 3
Screw the 2 front legs (10081422) in by hand.
Turn them clockwise until they stop.

Step 5 · manual step 4
Stick a felt pad (10050334) onto the end of each leg.
4 pads in total.

Step 6 · manual step 4
Stand the chair on its legs.

Step 7 · manual step 5
Sit in the chair for a moment.
All 4 legs should stand on the floor — see the manual, step 5.

Step 8 · manual step 6
Lay the chair on its back again.

Step 9 · manual step 6
Tighten all 4 nuts with the box spanner (120202).
Tighten until each nut sits flat against its washer.

Step 10 · manual step 6
Stand the chair upright again.

Step 11 · manual step 7
Push the headrest posts into the 2 holes in the back.
Press it all the way down — no gap between headrest and back.
Tips & safety
- Sit first, then tighten The 4 nuts stay hand-tight until you have sat in the chair (step 5) — then use the box spanner (step 6).
- Work on a soft surface A rug or the flattened box protects the fabric while the chair lies on its back.
Official instructions
This guide follows IKEA’s official assembly instructions (AA-2522784-1). Keep the printed manual to hand — if anything differs, the manual is right.



