IKEA · Chairs & Stools

How to assemble IKEA ÖRFJÄLL Swivel Chair

Step-by-step IKEA ÖRFJÄLL Swivel Chair assembly: 10 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2108720-8).

  • 10 illustrated steps
  • 7 steps in the manual
  • 1:44 video
  • 47×55×85 cm cm
IKEA ÖRFJÄLL Swivel Chair, assembled

What you need

Tools

  • Allen key (included)

You’ll need: only the Allen key (108490), included.

Hardware in the box

Part no. (as printed in the manual)Qty
1496964×
14969710×
10084210×

Step-by-step assembly

  1. Step 1: Slide the 5 legs into the centre hub. — IKEA ÖRFJÄLL assembly

    Step 1

    Slide the 5 legs into the centre hub.

    Work on a rug to avoid scratches. The hub lies upside down.

  2. Step 2: Fix each leg with 2 bolts (149697) and 2 washers (100842). — IKEA ÖRFJÄLL assembly

    Step 2

    Fix each leg with 2 bolts (149697) and 2 washers (100842).

    Tighten with the Allen key — 10 of each in total.

  3. Step 3: Press the 5 castors (10049027) into the ends of the legs. — IKEA ÖRFJÄLL assembly

    Step 3

    Press the 5 castors (10049027) into the ends of the legs.

  4. Step 4: Turn the base over onto its castors. — IKEA ÖRFJÄLL assembly

    Step 4 · manual step 3

    Turn the base over onto its castors.

  5. Step 5: Pull the protective cap off the top of the gas cylinder. — IKEA ÖRFJÄLL assembly

    Step 5 · manual step 4

    Pull the protective cap off the top of the gas cylinder.

    The cap is not needed — put it in the recycling.

  6. Step 6: Put the gas cylinder into the hole in the centre of the base. — IKEA ÖRFJÄLL assembly

    Step 6 · manual step 5

    Put the gas cylinder into the hole in the centre of the base.

  7. Step 7: Lay the seat upside down and place the plate on it. — IKEA ÖRFJÄLL assembly

    Step 7 · manual step 6

    Lay the seat upside down and place the plate on it.

    The round socket points up, away from the seat.

  8. Step 8: Fix the plate with 4 bolts (149696) and the Allen key. — IKEA ÖRFJÄLL assembly

    Step 8 · manual step 6

    Fix the plate with 4 bolts (149696) and the Allen key.

  9. Step 9: Turn the seat over and put it onto the gas cylinder. — IKEA ÖRFJÄLL assembly

    Step 9 · manual step 7

    Turn the seat over and put it onto the gas cylinder.

    The top of the cylinder goes into the socket under the seat.

  10. Step 10: To adjust the seat height, lift the lever under the seat. — IKEA ÖRFJÄLL assembly

    Step 10 · manual step 7

    To adjust the seat height, lift the lever under the seat.

    See the information box at manual step 7.

Tips & safety

  • Safety castors The castors brake automatically when nobody is sitting on the chair — so it won’t roll away when you stand up (manual p. 10).
  • Leave the gas cylinder to the experts Only trained personnel may replace or repair the seat-height adjustment parts (manual p. 5).

Official instructions

This guide follows IKEA’s official assembly instructions (AA-2108720-8). Keep the printed manual to hand — if anything differs, the manual is right.

Open the official PDF manual

More guides: Chairs & Stools