IKEA · Chairs & Stools
How to assemble IKEA MORABO Sofa
Step-by-step IKEA MORABO Sofa assembly: 8 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2178678-2).
- 8 illustrated steps
- 3 steps in the manual
- 1:32 video
- 200×85×80 cm
What you need
Tools
No tools needed.
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 108014 | 4× |
Step-by-step assembly
Step 1
Lay the sofa on its back — on a rug, not the bare floor.
This protects the fabric (info box, manual page 3).
Step 2 · manual step 1
Take the washer (108014) off each of the 4 legs.
Step 3 · manual step 1
Push a leg sleeve down over each leg.
Slide it on from the top, over the threaded stud.
Step 4 · manual step 1
Put the washer back on each threaded stud.
Step 5 · manual step 2
Screw the 2 legs into the lower corners by hand.
The washer sits between the leg and the frame.
Step 6 · manual step 2
Screw in the other 2 legs the same way.
4 legs in total, one in each corner.
Step 7
Stand the sofa up on its legs.
Step 8 · manual step 3
Push the 2 back cushions down into the slots along the back.
Tuck the lower edge into the slot — see the close-up in step 3.
Tips & safety
- Keep the manual with the sofa There is a pocket on the back of the sofa for it — info box, manual page 6.
- Something missing or unclear? Contact your IKEA store before you continue — page 2 of the manual.
Official instructions
This guide follows IKEA’s official assembly instructions (AA-2178678-2). Keep the printed manual to hand — if anything differs, the manual is right.
