IKEA · Chairs & Stools
How to assemble IKEA JOLPEN Loveseat
Step-by-step IKEA JOLPEN Loveseat assembly: 9 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2339895-1).
- 9 illustrated steps
- 7 steps in the manual
- 1:34 video
- 100×59×67 cm
What you need
Tools
- Allen key (included)
Only the Allen key — two are included.
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 114575 | 4× |
| 119063 | 9× |
| 124404 | 8× |
Step-by-step assembly
Step 1
Place the two side frames upright, facing each other.
The slanted back posts go at the back.
Step 2 · manual step 1
Lower the back panel between the slanted back posts.
Step 3 · manual step 2
Push 4 sleeve nuts (124404) into the sides of the back panel.
2 on each side, from the inside.
Step 4 · manual step 2
Screw 4 bolts (119063) through the posts with the Allen key.
Keep each bolt straight — its head must sit flat on the tube.
Step 5 · manual step 3
Lower the seat panel in between the side frames.
Step 6 · manual step 4
Fix the seat sides: 4 sleeve nuts (124404) + 4 bolts (119063).
Sleeve nuts into the seat from the inside, bolts through the rails. Keep each bolt straight.
Step 7 · manual step 5
Fix the seat with 4 long bolts (114575).
One at the front and one at the back of the seat, on each side.
Step 8 · manual step 6
From behind, screw 1 bolt (119063) through the tab under the back.
It joins the back panel to the seat.
Step 9 · manual step 7
Tighten all 12 side bolts again with the Allen key.
Tips & safety
- Assemble together with another person. The manual recommends two people.
- Missing a part or have a question? Contact your IKEA store.
Official instructions
This guide follows IKEA’s official assembly instructions (AA-2339895-1). Keep the printed manual to hand — if anything differs, the manual is right.
