IKEA · Chairs & Stools
How to assemble IKEA HAUGA Stool
Step-by-step IKEA HAUGA Stool assembly: 13 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2407932-2).
- 13 illustrated steps
- 7 steps in the manual
- 2:09 video
- 30×33×45 cm
What you need
Tools
- Phillips screwdriver
- Allen key (included)
You’ll need a Phillips screwdriver.
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 104322 | 4× |
| 101350 | 12× |
| 122620 | 6× |
| 122925 | 6× |
Step-by-step assembly
Step 1
Push 8 dowels (101350) into the ends of the two loose rails.
2 dowels in each end. Work on a rug.
Step 2
Screw 1 bracket (122620) into each loose rail.
Step 3
Screw 2 brackets (122620) into each side frame.
Both side frames come with the legs already fitted.
Step 4
Stand a side frame upside down and fit both loose rails into it.
The brackets face the inside.
Step 5 · manual step 4
Fit the other side frame onto the dowels.
Step 6 · manual step 4
Fasten them with 4 bolts (104322) and the Allen key.
2 bolts through the legs on this side…
Step 7 · manual step 4
…and 2 on the other side.
Use the Allen key (10083377).
Step 8 · manual step 5
Turn the frame over.
Step 9 · manual step 5
Push 4 dowels (101350) into the top edges of the rails.
Step 10 · manual step 6
Lay the seat face down and turn the frame upside down.
Step 11 · manual step 6
Lower the frame onto the seat.
The dowels go into the holes in the seat.
Step 12 · manual step 7
Fix the seat with 6 screws (122925).
Screw through the brackets with the Phillips screwdriver.
Step 13
Turn the stool upright.
Your HAUGA stool is ready.
Tips & safety
- Work on a rug or the flattened box. The manual shows this so the parts don’t get scratched.
- Missing a part or unsure about a step? The manual says: contact your IKEA store.
Official instructions
This guide follows IKEA’s official assembly instructions (AA-2407932-2). Keep the printed manual to hand — if anything differs, the manual is right.
