IKEA · Chairs & Stools
How to assemble IKEA GRÖNSTA Chair
Step-by-step IKEA GRÖNSTA Chair assembly: 6 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2372353-2).
- 6 illustrated steps
- 1 steps in the manual
- 1:33 video
- 52×55×80 cm
What you need
Tools
No tools needed.
Hardware in the box
See the manual.
Step-by-step assembly
Step 1
Lay the seat shell upside down on a soft surface.
Put the 4 legs next to it.
Step 2 · manual step 1
Each leg has a metal stud that screws into a socket under the seat.
One socket in each corner.
Step 3 · manual step 1
Screw the leg in by hand, turning it clockwise.
Keep turning until it sits tight against the seat.
Step 4 · manual step 1
Screw in the other 3 legs the same way.
Turn each one clockwise by hand.
Step 5 · manual step 1
Make sure there is no gap at the top of each leg.
If you can see a gap, keep turning the leg (manual, info box).
Step 6
Turn the chair the right way up.
Your GRÖNSTA chair is ready.
Tips & safety
- No gap at the top of the legs. Screw each leg in until it sits tight against the socket — see the info box in the manual.
- Same steps for the GRÖNSTA armchair. The manual covers both the chair and the armchair: the legs screw in the same way.
- Missing a part or not sure? The manual says: contact your IKEA store for help.
Official instructions
This guide follows IKEA’s official assembly instructions (AA-2372353-2). Keep the printed manual to hand — if anything differs, the manual is right.
