IKEA · Chairs & Stools
How to assemble IKEA DOMSTEN Stool
Step-by-step IKEA DOMSTEN Stool assembly: 7 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2366470-1).
- 7 illustrated steps
- 1 steps in the manual
- 1:31 video
- 34×34×45 cm
What you need
Tools
- Allen key (included)
No tools to buy — the Allen key (108490) is included.
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 10099738 | 6× |
Step-by-step assembly
Step 1
Lay the seat upside down on a soft surface.
The 6 holes for the bolts face up.
Step 2 · manual step 1
Place the first leg frame on the seat, legs pointing up.
Its bent bar lies flat on the seat, over 3 of the holes.
Step 3 · manual step 1
Place the second leg frame next to it.
The bent tips of the two frames meet in the middle.
Step 4 · manual step 1
Screw 3 bolts (10099738) through the first frame into the seat.
Use the Allen key (108490).
Step 5 · manual step 1
Screw the other 3 bolts through the second frame.
Step 6 · manual step 1
Tighten all 6 bolts with the Allen key (108490).
Turn clockwise until each frame sits tight against the seat.
Step 7 · manual step 1
Turn the stool the right way up.
Tips & safety
- Don’t stand or step on the stool. It is for sitting only — see the last page of the manual.
- Maximum load 100 kg (220.5 lb).
Official instructions
This guide follows IKEA’s official assembly instructions (AA-2366470-1). Keep the printed manual to hand — if anything differs, the manual is right.
