IKEA · Chairs & Stools
How to assemble IKEA DALFRED Bar Stool
Step-by-step IKEA DALFRED Bar Stool assembly: 10 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-399492-11).
- 10 illustrated steps
- 9 steps in the manual
- 2:02 video
- 50×50×63–74 cm
What you need
Tools
- Phillips screwdriver
- Hammer
- Allen key (included)
You’ll need: a Phillips screwdriver, a hammer and a rubber mallet. The Allen key (100092) is included.
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 105251 | 8× |
| 100212 | 4× |
| 108443 | 5× |
| 105298 | 4× |
| 107675 | 1× |
Step-by-step assembly
Step 1
Fix 2 legs to the two hub discs with 4 bolts (105251).
Tighten with the Allen key. Use the long bolts — not 100212.
Step 2
Fix the last 2 legs with 4 more bolts (105251).
Step 3
Slide the foot ring down between the legs.
Then screw in 4 bolts (100212) by hand — not with the Allen key yet.
Step 4
Now tighten the 4 bolts (100212) with the Allen key.
Step 5
Lay the seat upside down. Screw on the metal plate.
5 screws (108443) with the Phillips screwdriver.
Step 6
Stand the frame up. Fix the sleeve in the top hub.
4 screws (105298) with the Phillips screwdriver.
Step 7
Knock the spindle into the tube on the seat plate.
Use the hammer.
Step 8
Tap the rubber stop (107675) onto the spindle end.
Use the rubber mallet.
Step 9
Turn the seat over and screw it into the frame.
Turn the whole seat. Then put weight on it — see the manual, step 9.
Step 10 · manual step 9
Turn the seat to set the height: 63–74 cm.
Turn it one way to raise the seat, the other way to lower it.
Tips & safety
- Seat height 63–74 cm (24¾–29⅛″). Raise or lower it any time by turning the seat (manual, step 9).
- Unsure about a step? The manual says to contact IKEA rather than guess.
Official instructions
This guide follows IKEA’s official assembly instructions (AA-399492-11). Keep the printed manual to hand — if anything differs, the manual is right.
