IKEA · Chairs & Stools
How to assemble IKEA BÄSINGEN Shower Chair
Step-by-step IKEA BÄSINGEN Shower Chair assembly: 7 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2537019-2).
- 7 illustrated steps
- 2 steps in the manual
- 1:35 video
- 55×45×46 cm cm
What you need
Tools
No tools needed.
Hardware in the box
See the manual.
Step-by-step assembly
Step 1
The frame comes in one piece.
You only need to clip the seat on.
Step 2 · manual step 1
Turn the seat so its 2 pegs are at the front.
The pegs must line up with the 2 holes in the frame rail.
Step 3 · manual step 1
Pegs over the holes — not the other way round.
Wrong way round, the seat will not fit (manual step 1).
Step 4 · manual step 1
Lower the seat onto the frame.
The rolled edges rest on the side tubes of the frame.
Step 5 · manual step 2
Press down on the seat near both ends ①.
Use both hands.
Step 6 · manual step 2
Then press the rolled edges down ② until they click.
They snap over the frame tube on both sides.
Step 7 · manual step 2
Each rolled edge now grips the frame tube.
Check that both ends have clicked into place.
Tips & safety
- Make sure the seat is clipped on. Both rolled edges must be pressed fully down over the frame (manual step 2).
- Seat the right way round. The pegs under the seat go into the holes in the frame rail (manual step 1).
- Unsure, or something missing? Contact your IKEA store (manual p. 2).
Official instructions
This guide follows IKEA’s official assembly instructions (AA-2537019-2). Keep the printed manual to hand — if anything differs, the manual is right.
