IKEA · Chairs & Stools

How to assemble IKEA BÅRSLÖV Sleeper Sofa

Step-by-step IKEA BÅRSLÖV Sleeper Sofa assembly: 26 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2389303-7).

  • 26 illustrated steps
  • 37 steps in the manual
  • 3:20 video
  • 218×94×83 cm
IKEA BÅRSLÖV Sleeper Sofa, assembled

What you need

Tools

  • Allen key (included)

You’ll need: the 3 Allen keys from the box (100006, 100092 and the long crank key 152056) and scissors.

Hardware in the box

Part no. (as printed in the manual)Qty
1306466×
1521221×
101368264×
10510716×
1001184×
1002958×
1231004×
100864524×
1584576×
1008546×
101364512×
101364332×
100986112×
1153092×
100962514×
100962522×

Step-by-step assembly

  1. Step 1: Stand the 2 end frames on end, keyhole fittings facing in. — IKEA BÅRSLÖV assembly

    Step 1

    Stand the 2 end frames on end, keyhole fittings facing in.

    Check the keyhole positions against the manual, step 1.

  2. Step 2: Lay the first long rail on top and fix it with 4 bolts (105107). — IKEA BÅRSLÖV assembly

    Step 2

    Lay the first long rail on top and fix it with 4 bolts (105107).

    2 at each end, tightened with the Allen key 100092.

  3. Step 3: Screw the 3 slats to the rail with 4 screws (100295). — IKEA BÅRSLÖV assembly

    Step 3 · manual step 3–4

    Screw the 3 slats to the rail with 4 screws (100295).

    2 in the middle slat, 1 in each outer slat. Allen key 100006.

  4. Step 4: Turn the frame over together. — IKEA BÅRSLÖV assembly

    Step 4 · manual step 5

    Turn the frame over together.

    2 people — see the warning picture in manual step 5.

  5. Step 5: Lay the second long rail on top. — IKEA BÅRSLÖV assembly

    Step 5 · manual step 6

    Lay the second long rail on top.

  6. Step 6: Fix the corners: plates (10136451) and brackets (10136433). — IKEA BÅRSLÖV assembly

    Step 6 · manual step 7–11

    Fix the corners: plates (10136451) and brackets (10136433).

    With bolts 10136826 and 105107 — see manual steps 7–11 for which goes where.

  7. Step 7: Screw 4 screws (100295) through the rail into the slats. — IKEA BÅRSLÖV assembly

    Step 7 · manual step 12

    Screw 4 screws (100295) through the rail into the slats.

  8. Step 8: Click the 4 legs (10096251) on and add the felt pads (115309). — IKEA BÅRSLÖV assembly

    Step 8 · manual step 13–14

    Click the 4 legs (10096251) on and add the felt pads (115309).

    Then turn the frame over onto its legs.

  9. Step 9: Hook the long bar in at both ends and fix it with 2 bolts (105107). — IKEA BÅRSLÖV assembly

    Step 9 · manual step 15–16

    Hook the long bar in at both ends and fix it with 2 bolts (105107).

    One bolt at each end.

  10. Step 10: Lift the 3 packed cushions out of the seat section. — IKEA BÅRSLÖV assembly

    Step 10 · manual step 17

    Lift the 3 packed cushions out of the seat section.

    The seat section lies upside down.

  11. Step 11: Place the leg rail on the seat section, posts in the marked holes. — IKEA BÅRSLÖV assembly

    Step 11 · manual step 18

    Place the leg rail on the seat section, posts in the marked holes.

  12. Step 12: Fix the rail: bolt 152122 in the centre post, 2 brackets at the ends. — IKEA BÅRSLÖV assembly

    Step 12 · manual step 19–21

    Fix the rail: bolt 152122 in the centre post, 2 brackets at the ends.

    Brackets 10098611 with 4 bolts 123100. Use the long crank key 152056.

  13. Step 13: Click 2 legs (10096252) onto the posts and add felt pads. — IKEA BÅRSLÖV assembly

    Step 13 · manual step 22–23

    Click 2 legs (10096252) onto the posts and add felt pads.

  14. Step 14: Screw 4 bolts (100118) part way into the seat section. — IKEA BÅRSLÖV assembly

    Step 14 · manual step 24

    Screw 4 bolts (100118) part way into the seat section.

    By hand — leave a gap under the heads.

  15. Step 15: Turn the frame upside down and lower it onto the seat section. — IKEA BÅRSLÖV assembly

    Step 15 · manual step 25

    Turn the frame upside down and lower it onto the seat section.

    2 people. The keyhole slots go over the 4 bolts.

  16. Step 16: Slide the frame to lock the bolts, then tighten them. — IKEA BÅRSLÖV assembly

    Step 16 · manual step 26–27

    Slide the frame to lock the bolts, then tighten them.

    Use the long crank key 152056 through the frame.

  17. Step 17: Cut the 2 transport ties and throw them away. — IKEA BÅRSLÖV assembly

    Step 17 · manual step 28

    Cut the 2 transport ties and throw them away.

  18. Step 18: Turn the sofa base over together, then pull the seat out. — IKEA BÅRSLÖV assembly

    Step 18 · manual step 29

    Turn the sofa base over together, then pull the seat out.

    2 people — see the warning picture in manual step 29.

  19. Step 19: Hang the backrest on: the hooks go over the pins and slide down. — IKEA BÅRSLÖV assembly

    Step 19 · manual step 30

    Hang the backrest on: the hooks go over the pins and slide down.

  20. Step 20: Fix the backrest with 2 bolts (105107). — IKEA BÅRSLÖV assembly

    Step 20 · manual step 31

    Fix the backrest with 2 bolts (105107).

    From inside the frame, with the Allen key 100092.

  21. Step 21: Lay the board in the frame, light side up, and click in 4 fittings. — IKEA BÅRSLÖV assembly

    Step 21 · manual step 32

    Lay the board in the frame, light side up, and click in 4 fittings.

    Push fittings 10086452 — press until they click.

  22. Step 22: Screw 3 rods (130646) into each armrest by hand. — IKEA BÅRSLÖV assembly

    Step 22 · manual step 33

    Screw 3 rods (130646) into each armrest by hand.

  23. Step 23: Slide the armrests on; the rods go through the frame ends. — IKEA BÅRSLÖV assembly

    Step 23 · manual step 34

    Slide the armrests on; the rods go through the frame ends.

  24. Step 24: Fit a washer (100854) and a wing nut (158457) on each rod. — IKEA BÅRSLÖV assembly

    Step 24 · manual step 35

    Fit a washer (100854) and a wing nut (158457) on each rod.

    Tighten them by hand from inside the frame.

  25. Step 25: Push the seat section back in. — IKEA BÅRSLÖV assembly

    Step 25 · manual step 36

    Push the seat section back in.

  26. Step 26: Plump up the 3 back cushions and place them on the sofa. — IKEA BÅRSLÖV assembly

    Step 26 · manual step 37

    Plump up the 3 back cushions and place them on the sofa.

Tips & safety

  • Making the bed Pull the seat section out and fold the backrest down flat, as in the small pictures in manual steps 30–31.
  • Keep the keys Store the 3 Allen keys with this manual — you need them to retighten the sofa later.

Official instructions

This guide follows IKEA’s official assembly instructions (AA-2389303-7). Keep the printed manual to hand — if anything differs, the manual is right.

Open the official PDF manual

More guides: Chairs & Stools