IKEA · Chairs & Stools
How to assemble IKEA BALKARP Sleeper Sofa
Step-by-step IKEA BALKARP Sleeper Sofa assembly: 8 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-894477-4).
- 8 illustrated steps
- 3 steps in the manual
- 1:36 video
- 180×86×80 cm
What you need
Tools
- Allen key (included)
You’ll need: the Allen key that comes in the box — and a helper.
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 100854 | 4× |
| — | 4× |
Step-by-step assembly
Step 1
Lay the sofa opened flat and upside down.
Work on a soft surface, such as a rug, so the fabric isn’t damaged.
Step 2 · manual step 1
Place the 4 legs on the corners of the frame.
Step 3 · manual step 1
Put a washer (100854) on top of each leg.
Step 4 · manual step 1
Bolt each leg on with the Allen key.
One bolt through each washer — tighten all 4 firmly.
Step 5 · manual step 2
Turn the sofa over onto its legs — 2 people.
Step 6 · manual step 2
Lift the backrest up into the sofa position.
Follow arrows 1 and 2 in the manual, step 2.
Step 7 · manual step 3
To use it as a bed, fold the backrest down flat.
Lift the backrest until it clicks, then lower it flat.
Step 8 · manual step 3
Lift the backrest again to sit.
Tips & safety
- Work with 2 people Turn the sofa over onto its legs together (step 2).
- Assemble on a soft surface Lay the sofa on a rug or the packaging so the fabric isn’t scratched.
Official instructions
This guide follows IKEA’s official assembly instructions (AA-894477-4). Keep the printed manual to hand — if anything differs, the manual is right.
