How to assemble IKEA FÖRHÖJA Kitchen Cart

Step-by-step assembly

1. 

   Step 1

   Push the 10 slats into one of the shelf rails.

   The dowels are already in the slats. The slat with the screw pockets goes in position 5.

   ▶ Watch this step (0:16)

2. 

   Step 2

   Lay it flat and press the second rail onto the slats.

   Check the holes in the rail ends face as shown in the manual, step 2.

   ▶ Watch this step (0:23)

3. 

   Step 3

   Turn it over and fix slat 5 with 2 screws (109532).

   Use the Phillips screwdriver.

   ▶ Watch this step (0:30)

4. 

   Step 4 · manual step 1–3

   Build the second shelf the same way.

   The manual shows steps 1–3 twice — one for each shelf.

   ▶ Watch this step (0:38)

5. 

   Step 5 · manual step 4

   Build the drawer frame: 2 long rails, 2 end pieces and the divider.

   The short pieces have their dowels fitted — press them into the holes in the rails.

   ▶ Watch this step (0:43)

6. 

   Step 6 · manual step 5

   Push 8 dowels (101350) into the ends of the shelf rails.

   One at each end of every rail.

   ▶ Watch this step (0:50)

7. 

   Step 7 · manual step 5

   Lay one leg pair flat and stand both shelves on end in it.

   Check the hole pattern in the rail ends — see the manual, step 5.

   ▶ Watch this step (0:57)

8. 

   Step 8 · manual step 6

   Push 4 dowels into the drawer frame and stand it in too.

   The divider points sideways — see the manual, step 6.

   ▶ Watch this step (1:05)

9. 

   Step 9 · manual step 7

   Lay the leg pair with the wheels on top and fix it with 6 bolts.

   Bolts 104321 — fit the Allen key into the key holder to tighten them.

   ▶ Watch this step (1:13)

10. 

    Step 10 · manual step 8

    Turn the cart upright.

    The wheels end up at the bottom of the legs.

    ▶ Watch this step (1:22)

11. 

    Step 11 · manual step 9

    Fix the first leg pair with 6 more bolts (104321).

    Tighten them with the Allen key.

    ▶ Watch this step (1:28)

12. 

    Step 12 · manual step 10

    Screw 2 cam bolts (118331) into the underside of the top.

    Lay the top face-down on a soft surface. Phillips screwdriver.

    ▶ Watch this step (1:36)

13. 

    Step 13 · manual step 11

    Turn the top over and lower it onto the cart.

    The cam bolts go into the holes in the frame below.

    ▶ Watch this step (1:42)

14. 

    Step 14 · manual step 12

    Insert 2 cam locks (113434) and turn them clockwise.

    Use the flat screwdriver.

    ▶ Watch this step (1:49)

15. 

    Step 15 · manual step 13

    Drive 4 screws (109532) into the ends, just under the top.

    2 at each end. Use the Phillips screwdriver.

    ▶ Watch this step (1:56)

16. 

    Step 16 · manual step 14

    Slide the 2 drawers in.

    ▶ Watch this step (2:04)