How to assemble IKEA VIHALS Wardrobe with 2 Doors

Step-by-step assembly

1. 

   Step 1

   Screw the 2 rail holders (10042365) onto the divider and a side.

   1 screw (146113) each — not the 146114 screws. Lay the panels flat on the rug.

   ▶ Watch this step (0:21)

2. 

   Step 2

   Stand the other side on its front edge and hook the fixed shelf on.

   Its 3 connectors go into the keyholes — then press the shelf down to lock.

   ▶ Watch this step (0:27)

3. 

   Step 3

   Lower the divider onto the other end of the shelf.

   Same connectors — press down until they lock.

   ▶ Watch this step (0:34)

4. 

   Step 4 · manual step 4–5

   Press the 6 feet (10061178) into the bottom panel, then turn it over.

   ▶ Watch this step (0:40)

5. 

   Step 5 · manual step 6

   Hammer 4 inserts (123840) into the bottom and top panels.

   2 in each panel, near the front edge.

   ▶ Watch this step (0:47)

6. 

   Step 6 · manual step 7

   Hang the bottom panel onto the side and the divider.

   6 connectors: push them into the keyholes, then press down to lock.

   ▶ Watch this step (0:52)

7. 

   Step 7 · manual step 8

   Hang the second side onto the bottom panel.

   Rail holder on the inside.

   ▶ Watch this step (0:59)

8. 

   Step 8 · manual step 9

   Hang the top panel onto the three long panels.

   9 connectors — press down to lock each one.

   ▶ Watch this step (1:05)

9. 

   Step 9 · manual step 10

   Screw 4 bolts (10077982) into the corners with the Allen key.

   ▶ Watch this step (1:11)

10. 

    Step 10 · manual step 11

    Lay in the back panel and slide it into the groove.

    Leave the last section folded up for now.

    ▶ Watch this step (1:17)

11. 

    Step 11 · manual step 12–13

    Fix the back with 11 rivets, then press 5 clips into the joint.

    Rivet: plug 151706 first, then pin 151705. Clips 10093081 + 10093082 — see the manual, step 13.

    ▶ Watch this step (1:24)

12. 

    Step 12 · manual step 14

    Stand the wardrobe up — two people.

    ▶ Watch this step (1:32)

13. 

    Step 13 · manual step 14

    Fold the last section flat into the groove of the side.

    ▶ Watch this step (1:38)

14. 

    Step 14 · manual step 15–16

    Fix it with 6 rivets, then press in 7 clips along the side.

    Plug 151706, then pin 151705. Clips 10093081 + 10093082.

    ▶ Watch this step (1:42)

15. 

    Step 15 · manual step 17–19

    Press the 2 wall spacers (150688) into the top back corners.

    Skirting board? Screw the caps (150689) on and turn them until the wardrobe stands straight (steps 18–19).

    ▶ Watch this step (1:50)

16. 

    Step 16 · manual step 20–21

    Mark the 2 holes on the wall, then drill and plug them.

    Use fixings that suit your wall — see the manual, page 22. Ask a professional if unsure.

    ▶ Watch this step (1:56)

17. 

    Step 17 · manual step 22

    Push it back and screw it to the wall through the top corners.

    Washer 126916 on each screw: 10116098 with a skirting board, 10116097 without.

    ▶ Watch this step (2:03)

18. 

    Step 18 · manual step 22–23

    Press on the 2 cover caps, then lay the clothes rail into its holders.

    Caps 10005905, rail 124665.

    ▶ Watch this step (2:10)

19. 

    Step 19 · manual step 24–25

    Press in 24 shelf supports (10051660) and lay in the 4 shelves.

    3 shelves on the left, 1 above the rail.

    ▶ Watch this step (2:16)

20. 

    Step 20 · manual step 26–27

    Screw the 2 metal rails (10059907) onto the ends of the mirror panel.

    2 screws (146114) each. Then push 2 dowels (101350) into the bottom rail.

    ▶ Watch this step (2:25)

21. 

    Step 21 · manual step 28–29

    Stand the mirror panel in next to the divider. Bolt it through the top.

    Dowels into the bottom panel, then 2 bolts (100214) with the Allen key — use a step ladder.

    ▶ Watch this step (2:32)

22. 

    Step 22 · manual step 30

    Fix the mirror panel to the divider with 5 rivets.

    Plug 151706, then pin 151705.

    ▶ Watch this step (2:40)

23. 

    Step 23 · manual step 31

    Screw 4 hinges (10071303) onto each door.

    Lay the doors face-down, hinges along the outer edges.

    ▶ Watch this step (2:46)

24. 

    Step 24 · manual step 32

    Hang the doors: screw each hinge to the side panel.

    Left door on the left side, right door on the right side. Use a step ladder for the top hinge.

    ▶ Watch this step (2:52)

25. 

    Step 25 · manual step 33

    Screw a handle (10071494) onto each door, then close the doors.

    2 screws (146114) per handle, from the inside, on the edge next to the mirror.

    ▶ Watch this step (3:00)