How to assemble IKEA VIHALS Cabinet with Sliding Doors

Step-by-step assembly

1. 

   Step 1 · manual step 1–3

   Hang both sides and the divider onto the top panel.

   Top panel on its front edge on the rug. Slide the pins into the keyholes, then press each panel down.

   ▶ Watch this step (0:21)

2. 

   Step 2 · manual step 4–5

   Press the 6 feet into the bottom panel and hang it onto the other end.

   Feet 10061178. Its 6 keyhole pins go in the same way — press it down to lock.

   ▶ Watch this step (0:31)

3. 

   Step 3 · manual step 6–7

   Tighten 4 bolts in the corners, then lay in the 2 back panels.

   Bolts 10077982 with the Allen key. Push the edge of each back panel into the side groove first.

   ▶ Watch this step (0:41)

4. 

   Step 4 · manual step 8–9

   Push 10 sleeves and 10 pins through the back, then fit 6 clips.

   Sleeves 151708 first, then pins 151707. Clips 10093081 + wedges 10093082.

   ▶ Watch this step (0:51)

5. 

   Step 5 · manual step 10

   Fit the 2 wall fittings (150688) into the top corners.

   ▶ Watch this step (1:01)

6. 

   Step 6 · manual step 11

   Stand the cabinet up. With a skirting board, screw on the 2 spacers.

   Spacers 150689 onto the wall fittings, by hand. No skirting board? Skip to step 13.

   ▶ Watch this step (1:07)

7. 

   Step 7 · manual step 12–15

   Mark the holes, drill, then screw the fittings to the wall.

   Screws 147968 with spacers, 158469 without — each with a washer 126916. Plugs 121714 suit most walls: see the manual, page 21.

   ▶ Watch this step (1:16)

8. 

   Step 8 · manual step 16

   Press the 2 caps (10005905) onto the wall fittings.

   ▶ Watch this step (1:26)

9. 

   Step 9 · manual step 17

   Press in the 16 shelf supports (10051660).

   ▶ Watch this step (1:32)

10. 

    Step 10 · manual step 18–19

    Press the 2 lower tracks and the 2 upper tracks into the grooves.

    Lower 157975 into the bottom, upper 157976 into the top. Start at one end and press along.

    ▶ Watch this step (1:39)

11. 

    Step 11 · manual step 20–21

    Screw the track stops into the ends of the tracks.

    Lower stops 192160 and upper stops 192159, each with 1 screw 109535.

    ▶ Watch this step (1:47)

12. 

    Step 12 · manual step 22–23

    Fit the 4 top fittings and the 4 bottom fittings onto the doors.

    2 pins (192158) each. Top: 192157 (with lock). Bottom: 150521 (with adjusting wheel).

    ▶ Watch this step (1:55)

13. 

    Step 13 · manual step 24–25

    Hang the doors: top into the upper track, bottom into the lower track.

    Back track first, then the front track. Flip the 2 levers on the top fittings to lock.

    ▶ Watch this step (2:05)

14. 

    Step 14 · manual step 26

    Fit the 2 door catches (192161) inside the right side.

    Slide the front door aside. 2 pins (192158) per catch.

    ▶ Watch this step (2:15)

15. 

    Step 15 · manual step 27

    Clip the 2 handles onto the outer door edges and screw them on.

    Handles 10078838, 2 screws 146114 each.

    ▶ Watch this step (2:22)

16. 

    Step 16 · manual step 28

    Lay the 4 shelves onto the supports and press them down.

    Slide one door aside at a time.

    ▶ Watch this step (2:30)