How to assemble IKEA SUNDVIK Wardrobe

Step-by-step assembly

1. 

   Step 1 · manual step 1–2

   Screw 8 cam bolts (112614) and 6 cam bolts (100481) into the side frames.

   Both frames flat on a rug, inner side up.

   ▶ Watch this step (0:23)

2. 

   Step 2 · manual step 3–4

   Screw in 6 cam bolts (118331), then push in 16 dowels (101350).

   ▶ Watch this step (0:29)

3. 

   Step 3 · manual step 5–7

   Click on 4 hinge plates (128711), screw on the runners and 2 feet.

   Runners 156500: L on the left frame, R on the right, 2 screws (100347) each. Feet 102728 go in the front legs.

   ▶ Watch this step (0:35)

4. 

   Step 4 · manual step 8–9

   Stand the 3 front rails on the left frame. Lock them with 3 cam locks (122332).

   Turn clockwise with the flat-head screwdriver.

   ▶ Watch this step (0:42)

5. 

   Step 5 · manual step 10–11

   Fit the two shelves and tighten their 4 cam locks. Slide the bottom into its groove.

   The shelf cam locks are already fitted — just turn them.

   ▶ Watch this step (0:49)

6. 

   Step 6 · manual step 12–13

   Push 4 long dowels (101356) into one back panel. Slide it down the groove.

   ▶ Watch this step (0:57)

7. 

   Step 7 · manual step 14–15

   Slide the second back panel down onto the dowels. Lock with 3 cam locks (122332).

   ▶ Watch this step (1:04)

8. 

   Step 8 · manual step 16

   Turn the right side frame over and lay it on top.

   ▶ Watch this step (1:11)

9. 

   Step 9 · manual step 17–19

   Lock the frame: 4 shelf cam locks, then 6 cam locks (122332).

   Then drive 4 screws (109510) through the back into the bottom.

   ▶ Watch this step (1:17)

10. 

    Step 10 · manual step 20–21

    Hang the clothes rail under the upper shelf on 2 eye bolts (112805).

    Tighten the nuts (100673) with the crank wrench (100002).

    ▶ Watch this step (1:25)

11. 

    Step 11 · manual step 22–26

    Join the 3 gallery rails, then fix the top panel on with 4 bolts (100224).

    Dowels 101350, 2 cam bolts (100481) + 2 cam locks (122332). Panel upside down — Allen key 100006.

    ▶ Watch this step (1:31)

12. 

    Step 12 · manual step 27–31

    Fit the wall brackets (106989), a cam lock, 8 cam bolts and 2 dowels underneath.

    Brackets: screws 109049 + washers 100823. Cam bolts: 6× 100481, 2× 118331 — see the manual.

    ▶ Watch this step (1:39)

13. 

    Step 13 · manual step 32

    Raise the wardrobe upright — this needs two people.

    ▶ Watch this step (1:46)

14. 

    Step 14 · manual step 32

    Turn the top over and lower it onto the frame.

    ▶ Watch this step (1:52)

15. 

    Step 15 · manual step 33–35

    Lock the top: 6 cam locks inside, 2 at the back (122332).

    Then drive 2 bolts (100224) down into the front legs with the Allen key.

    ▶ Watch this step (1:58)

16. 

    Step 16 · manual step 36–37

    Drive 2 screws (109053) into the middle shelf. Press in 4 door bumpers (115339).

    See the manual, step 36, for the exact holes.

    ▶ Watch this step (2:06)

17. 

    Step 17 · manual step 38–42

    Level it with the 2 feet, then screw both brackets to the wall.

    Screws 109048 + washers 100823. Pick plugs (121714) and drill bit for your wall — see steps 39–41.

    ▶ Watch this step (2:12)

18. 

    Step 18 · manual step 43–44

    Lay the doors face-down. Screw a hinge onto each end.

    123746 at one end (step 43), 123772 at the other (step 44).

    ▶ Watch this step (2:19)

19. 

    Step 19 · manual step 45

    Clip the hinges onto the mounting plates — click!

    Right door on the right, left door on the left.

    ▶ Watch this step (2:25)

20. 

    Step 20 · manual step 46–47

    Drawer: 4 cam bolts (118331) into the front, 4 dowels (101345) into the sides.

    Lay the drawer front face-down.

    ▶ Watch this step (2:32)

21. 

    Step 21 · manual step 48–49

    Stand both sides on the front. Lock with 4 cam locks (110630).

    Not the 119030 cam locks — those are for step 53.

    ▶ Watch this step (2:39)

22. 

    Step 22 · manual step 50–53

    Slide in the bottom, put on the back, push in 4 fittings and turn 4 cam locks.

    Fittings 145718, cam locks 119030.

    ▶ Watch this step (2:45)

23. 

    Step 23 · manual step 54–55

    Turn the drawer upright. Screw on the runners with 6 screws (100347).

    Then press in the drawer stop (106698) — see step 55.

    ▶ Watch this step (2:52)

24. 

    Step 24 · manual step 56

    Fit the 3 knobs (117616) — 2 on the doors, 1 on the drawer.

    Screw 119976 + washer 100823 from the inside.

    ▶ Watch this step (2:58)

25. 

    Step 25 · manual step 57

    Close the doors and slide the drawer in.

    ▶ Watch this step (3:04)