How to assemble IKEA STÄLL Shoe Cabinet with 4 Compartments

Step-by-step assembly

1. 

   Step 1

   Push 2 dowels (101350) into the end of the middle panel.

   Lay the panels out on a rug.

   ▶ Watch this step (0:20)

2. 

   Step 2

   Join the bottom panel to the middle panel with 1 screw (100214).

   Tighten it with the Allen key.

   ▶ Watch this step (0:26)

3. 

   Step 3

   Screw 12 cam bolts (118331) into the panels.

   3 in each side panel and 6 in the top panel.

   ▶ Watch this step (0:33)

4. 

   Step 4

   Screw on 8 plastic brackets (10099877).

   2 screws (100347) each. Check the exact positions in the manual, step 4.

   ▶ Watch this step (0:39)

5. 

   Step 5

   Fit 8 pin fittings (10097027) with 1 screw (100347) each.

   ▶ Watch this step (0:46)

6. 

   Step 6 · manual step 6–7

   Fit the left side panel and lock it with 2 cam locks (118137).

   2 dowels go into the side panel first. Turn the locks clockwise.

   ▶ Watch this step (0:52)

7. 

   Step 7 · manual step 8

   Push 6 dowels into the right side panel and the back rail.

   Then fit the rail and the right side panel.

   ▶ Watch this step (1:00)

8. 

   Step 8 · manual step 9

   Insert 4 cam locks (118137) and turn them clockwise.

   2 at the bottom panel, 2 in the back rail.

   ▶ Watch this step (1:08)

9. 

   Step 9 · manual step 10

   Screw the back rail to the middle panel — 1 screw (100214).

   Use the Allen key.

   ▶ Watch this step (1:14)

10. 

    Step 10 · manual step 11

    Push 5 dowels into the panel ends and fit the top panel.

    ▶ Watch this step (1:19)

11. 

    Step 11 · manual step 12

    Insert 6 cam locks (118137) and turn them clockwise.

    This pulls the top panel tight.

    ▶ Watch this step (1:26)

12. 

    Step 12 · manual step 13–15

    Build the base: rail and 2 legs.

    4 cam bolts (118331) in the legs, 2 dowels in the rail, then lock with 2 cam locks.

    ▶ Watch this step (1:33)

13. 

    Step 13 · manual step 16–18

    Fit the 2 back pieces onto the legs.

    Angle bracket (102715) with screw 109503 on each, a dowel in each leg, then 2 cam locks.

    ▶ Watch this step (1:42)

14. 

    Step 14 · manual step 19

    Fit the base under the bottom panel.

    2 screws 109503 through the brackets, 1 screw 109577 through the rail.

    ▶ Watch this step (1:51)

15. 

    Step 15 · manual step 19

    Turn the cabinet over onto its back.

    ▶ Watch this step (1:59)

16. 

    Step 16 · manual step 20

    Fix the base with 2 screws (100214).

    Use the Allen key — see the manual, step 20.

    ▶ Watch this step (2:04)

17. 

    Step 17 · manual step 21

    Tap the 2 glides (153552) into the legs with a hammer.

    ▶ Watch this step (2:11)

18. 

    Step 18 · manual step 22

    Stand the cabinet upright against the wall.

    STÄLL must be fixed to the wall to prevent tipping.

    ▶ Watch this step (2:16)

19. 

    Step 19 · manual step 23

    Screw the back rail to the wall: 2 screws 109048 with washers 100823.

    Plugs 121714 are for solid or hollow walls; in solid wood use the screws without plugs.

    ▶ Watch this step (2:21)

20. 

    Step 20 · manual step 24–26

    Click the plastic parts of a compartment together.

    Frame 10130101 on the perforated panel, then the end pieces 10130123 and 10130098.

    ▶ Watch this step (2:30)

21. 

    Step 21 · manual step 27–28

    Place it on the back of a door and fix with 4 screws (151930).

    Use a hand screwdriver — no power drill.

    ▶ Watch this step (2:38)

22. 

    Step 22 · manual step 24–28

    Build all 4 compartments the same way.

    ▶ Watch this step (2:46)

23. 

    Step 23 · manual step 29

    Hook each compartment into the cabinet and tilt it closed.

    It hangs on the plastic fittings at both sides.

    ▶ Watch this step (2:51)