How to assemble IKEA STÄLL Shoe Cabinet with 3 Compartments

Step-by-step assembly

1. 

   Step 1

   Screw 8 cam bolts (118331) into the two side panels.

   Lay the sides on a rug, inner faces up. 4 bolts in each.

   ▶ Watch this step (0:20)

2. 

   Step 2 · manual step 2–3

   Screw on 6 compartment fittings (110364) and 6 pin fittings (116713).

   3 of each per side, with screws 100347.

   ▶ Watch this step (0:26)

3. 

   Step 3 · manual step 4–5

   Push 3 dowels into the bottom panel and stand it on the side.

   Lock it with 2 cam locks (118137) — turn them clockwise.

   ▶ Watch this step (0:34)

4. 

   Step 4 · manual step 6–7

   Push 4 dowels into the 2 back rails and stand them on the side.

   Lock each rail with 1 cam lock (118137).

   ▶ Watch this step (0:43)

5. 

   Step 5 · manual step 8

   Push 2 dowels into the narrow strip and stand it on the side.

   It goes at the top end, by the back edge.

   ▶ Watch this step (0:52)

6. 

   Step 6 · manual step 9

   Push 9 dowels into the free ends and lay the other side on top.

   Its fittings face inwards.

   ▶ Watch this step (0:59)

7. 

   Step 7 · manual step 10

   Insert 4 cam locks (118137) and turn them clockwise.

   2 in the bottom panel, 1 in each back rail.

   ▶ Watch this step (1:08)

8. 

   Step 8 · manual step 11

   Screw 4 cam bolts (118331) into the top panel.

   ▶ Watch this step (1:14)

9. 

   Step 9 · manual step 12

   Turn the cabinet onto its front. Push in 6 dowels and fit the top.

   ▶ Watch this step (1:20)

10. 

    Step 10 · manual step 13

    Insert 4 cam locks (118137) and turn them clockwise.

    This pulls the top panel tight.

    ▶ Watch this step (1:30)

11. 

    Step 11 · manual step 14–16

    Build the base: 2 legs and the front rail.

    4 cam bolts (118331) in the legs, 2 dowels in the rail, then 2 cam locks.

    ▶ Watch this step (1:36)

12. 

    Step 12 · manual step 17–19

    Fit the 2 side bars onto the legs.

    Angle bracket (102715) with screw 109503 on each, a dowel in each leg, then 2 cam locks.

    ▶ Watch this step (1:45)

13. 

    Step 13 · manual step 20

    Fit the base onto the bottom panel.

    2 screws 109503 through the brackets, 1 screw 109577 through the rail.

    ▶ Watch this step (1:54)

14. 

    Step 14 · manual step 21

    Turn the cabinet over onto its back.

    ▶ Watch this step (2:03)

15. 

    Step 15 · manual step 21

    Screw the bottom panel to the legs with 2 screws (100214).

    Use the Allen key.

    ▶ Watch this step (2:10)

16. 

    Step 16 · manual step 22

    Tap the 2 glides (153552) into the legs with a hammer.

    ▶ Watch this step (2:16)

17. 

    Step 17 · manual step 24

    Stand the cabinet upright against the wall.

    STÄLL must be fixed to the wall to prevent tipping.

    ▶ Watch this step (2:22)

18. 

    Step 18 · manual step 24

    Screw the upper back rail to the wall: 2 screws 109048 with washers 100823.

    Use plugs 121714 in solid or hollow walls; in solid wood, screws only. Not the shorter 109577.

    ▶ Watch this step (2:27)

19. 

    Step 19 · manual step 25–29

    Click the plastic parts of a compartment together.

    Fold out the 2 perforated panels (10130232), click on the end pieces (10130199, 10130149), then panel 10130142.

    ▶ Watch this step (2:36)

20. 

    Step 20 · manual step 30–31

    Place it on the back of a door and fix with 6 screws (151930).

    Use a hand screwdriver — no power drill.

    ▶ Watch this step (2:44)

21. 

    Step 21 · manual step 25–31

    Build all 3 compartments the same way.

    ▶ Watch this step (2:53)

22. 

    Step 22 · manual step 32

    Hook each compartment into the cabinet and tilt it closed.

    It hangs on the fittings at both sides.

    ▶ Watch this step (2:58)