How to assemble IKEA SKRUVBY Sideboard

Step-by-step assembly

1. 

   Step 1

   Screw the 5 feet (152676) into the bottom panel.

   Lay the bottom panel upside-down on the rug.

   ▶ Watch this step (0:23)

2. 

   Step 2

   Turn it over and screw in 6 connectors (10047135).

   Screw them all the way in by hand — no thread may show.

   ▶ Watch this step (0:29)

3. 

   Step 3

   Push 12 dowels (101345) into the ends of the 3 upright panels.

   2 in each end.

   ▶ Watch this step (0:35)

4. 

   Step 4

   Screw the drawer runners onto the middle and right panels.

   Runner CL on the middle panel, CR on the right side — 3 screws (146114) each.

   ▶ Watch this step (0:40)

5. 

   Step 5

   Stand the 3 panels onto the bottom panel.

   The connectors and dowels go into the holes in their lower ends.

   ▶ Watch this step (0:47)

6. 

   Step 6 · manual step 6–7

   Insert 6 cam locks and turn them clockwise.

   4 cam locks 10078589 in the sides, the 2 double ones (10115587) in the middle panel.

   ▶ Watch this step (0:54)

7. 

   Step 7 · manual step 8

   Slide the 2 back panels down into the grooves.

   Push them all the way down into the groove in the bottom panel.

   ▶ Watch this step (1:00)

8. 

   Step 8 · manual step 9–10

   Screw 6 connectors into the top, then press it on.

   Connectors 10047135, underside up, all the way in by hand.

   ▶ Watch this step (1:06)

9. 

   Step 9 · manual step 11–12

   Insert 6 cam locks at the top and turn them clockwise.

   Again the 2 double cam locks (10115587) go in the middle panel.

   ▶ Watch this step (1:14)

10. 

    Step 10 · manual step 13

    Turn the sideboard round and fit the 22 back clips.

    Push in the clips (10093081), then lock each one with a 10093082.

    ▶ Watch this step (1:20)

11. 

    Step 11 · manual step 14–16

    Fit the 2 wall fittings (150688) at the top of the back.

    Skirting board on your wall? Screw a knob (150689) onto each — see the manual, steps 15–16.

    ▶ Watch this step (1:26)

12. 

    Step 12 · manual step 17

    Turn the 5 feet to level the sideboard.

    Check with a spirit level on the top.

    ▶ Watch this step (1:32)

13. 

    Step 13 · manual step 18–19

    Mark the holes on the wall, drill and fit plugs.

    Plugs (121714) for solid and hollow walls; none for solid wood — see manual p. 22–23.

    ▶ Watch this step (1:37)

14. 

    Step 14 · manual step 20–22

    Push it back and screw it to the wall through the fittings.

    Washer (126916) + screw 158469 — use the long 147968 if you fitted the knobs. Then snap on the 2 covers.

    ▶ Watch this step (1:45)

15. 

    Step 15 · manual step 23–24

    Push in 16 shelf supports and lay the 4 shelves on them.

    4 supports per shelf (10075382), at the height you want.

    ▶ Watch this step (1:53)

16. 

    Step 16 · manual step 25

    Screw a hinge (10071303) into each door — 2 per door.

    Doors face-down; the hinge cups go in the round holes.

    ▶ Watch this step (2:01)

17. 

    Step 17 · manual step 26

    Hang the doors and screw the hinges to the panels.

    2 screws per hinge. Easier with two people.

    ▶ Watch this step (2:07)

18. 

    Step 18 · manual step 27–28

    Fit a handle (130417) on each door, then close them.

    2 screws (100400) per handle, from inside. Stick on the 3 bumpers (104663) — see step 28.

    ▶ Watch this step (2:15)

19. 

    Step 19 · manual step 29

    Now the drawer: screw 4 cam bolts (118331) into the front.

    Lay the drawer front face-down on the rug.

    ▶ Watch this step (2:23)

20. 

    Step 20 · manual step 30–31

    Push a dowel into each side and stand the sides on the front.

    Dowels 101345 — one in the front end of each side.

    ▶ Watch this step (2:28)

21. 

    Step 21 · manual step 32

    Insert 4 cam locks (119030) and turn them to lock.

    ▶ Watch this step (2:35)

22. 

    Step 22 · manual step 33–35

    Slide in the drawer bottom, then the back.

    First hammer the wire (10040242) into the back panel.

    ▶ Watch this step (2:40)

23. 

    Step 23 · manual step 36–37

    Push in 4 pins (145718), then lock them with 4 cam locks.

    Cam locks 119030 go into the edge of the back panel.

    ▶ Watch this step (2:48)

24. 

    Step 24 · manual step 38

    Turn the drawer over and screw on the runners.

    Runner DL left, DR right — 2 screws (146114) each.

    ▶ Watch this step (2:55)

25. 

    Step 25 · manual step 39

    Fit the handle (130417) with 2 screws (100400).

    Screw them in from inside the drawer.

    ▶ Watch this step (3:02)

26. 

    Step 26 · manual step 40

    Slide the drawer onto the runners in the sideboard.

    ▶ Watch this step (3:07)