How to assemble IKEA MILSBO Glass-Door Cabinet

Step-by-step assembly

1. 

   Step 1

   Screw an adjustable foot (195313) into each of the 4 legs.

   Lay the legs on a rug.

   ▶ Watch this step (0:17)

2. 

   Step 2 · manual step 2–3

   Stand the legs up and join them with the 4 rails.

   Long rails front and back, short rails at the sides — check the brackets, manual step 2.

   ▶ Watch this step (0:23)

3. 

   Step 3 · manual step 4

   Fix the rails with 8 bolts (115461) and the Allen key.

   Use 115461 here — not the longer 105103.

   ▶ Watch this step (0:31)

4. 

   Step 4 · manual step 5–6

   Lay the bottom frame on top. Fix it with 6 bolts (115461).

   4 bolts in step 5, then 2 more in step 6.

   ▶ Watch this step (0:38)

5. 

   Step 5 · manual step 7

   Stand the 4 posts on the corners. Fix each with a bolt (105103).

   The long 105103 bolts go in here, with the Allen key.

   ▶ Watch this step (0:45)

6. 

   Step 6 · manual step 8

   Lower the bottom plate into the frame.

   ▶ Watch this step (0:53)

7. 

   Step 7 · manual step 9

   Fit the back strip. Fix it at the bottom with 1 screw (100404).

   Use the Phillips screwdriver.

   ▶ Watch this step (0:58)

8. 

   Step 8 · manual step 10–11

   Put the top frame on. Fix it with 4 bolts (115461).

   ▶ Watch this step (1:04)

9. 

   Step 9 · manual step 12

   Fix the top of the back strip with 1 screw (100404).

   ▶ Watch this step (1:11)

10. 

    Step 10 · manual step 13

    Fit the back glass: top edge up into the groove first.

    Then swing the bottom in and push it down into place. Two people. Never stand glass on a hard edge.

    ▶ Watch this step (1:16)

11. 

    Step 11 · manual step 14

    Hold the back glass with 3 clips (10003221) on the strip.

    One screw (100404) in each clip.

    ▶ Watch this step (1:25)

12. 

    Step 12 · manual step 15

    Fit the right side glass the same way.

    Push it up into the top groove, then swing the bottom in and down.

    ▶ Watch this step (1:31)

13. 

    Step 13 · manual step 16

    Screw 4 shelf supports (10003241) to the right-hand posts.

    1 screw (100404) each — check the holes in the manual, step 16.

    ▶ Watch this step (1:38)

14. 

    Step 14 · manual step 17

    Fit the left side glass the same way.

    ▶ Watch this step (1:45)

15. 

    Step 15 · manual step 18–19

    Screw on the other 8 shelf supports (10003241).

    4 on the left posts (step 18), then 4 for the middle shelf (step 19).

    ▶ Watch this step (1:51)

16. 

    Step 16 · manual step 20–21

    Check every pane sits in its groove. Tighten the top screws.

    The 4 bolts in the top with the Allen key, then the strip screw at the back.

    ▶ Watch this step (1:59)

17. 

    Step 17 · manual step 22

    Lay the doors face down. Fit a latch (195311) on each.

    2 screws (100408) per latch, at the top outer corner.

    ▶ Watch this step (2:06)

18. 

    Step 18 · manual step 23

    Push the 2 hinge pins (151059) into the bottom frame.

    One at each front corner.

    ▶ Watch this step (2:13)

19. 

    Step 19 · manual step 24–25

    Set each door on its pin, then lock it at the top.

    Slide the latch up into the top frame and push in the pin (195362).

    ▶ Watch this step (2:18)

20. 

    Step 20 · manual step 26–27

    Fit the handles (10002580): 2 screws (100404) each.

    The screws go in from the inside of the door. The key (10002394) fits the lock.

    ▶ Watch this step (2:27)

21. 

    Step 21 · manual step 28

    Turn the feet until the doors line up at the top.

    Check with a spirit level.

    ▶ Watch this step (2:34)

22. 

    Step 22 · manual step 29

    Fix the cabinet to the wall with the 2 brackets (106989).

    1 screw (100404) per bracket into the top. Wall screws are not included.

    ▶ Watch this step (2:40)

23. 

    Step 23 · manual step 30

    Open the doors and lay in the 3 shelves.

    They rest on the 12 supports.

    ▶ Watch this step (2:48)