How to assemble IKEA LOMMARP Cabinet with Glass Doors

Step-by-step assembly

1. 

   Step 1 · manual step 1–2

   Base: screw 4 cam bolts (100481) into the 2 leg pieces.

   Then push 4 dowels (101345) into the ends of the front rail.

   ▶ Watch this step (0:22)

2. 

   Step 2 · manual step 3–5

   Join the 3 pieces and lock them with 4 cam locks.

   Turn the locks clockwise. Then push 6 dowels into the top edges.

   ▶ Watch this step (0:28)

3. 

   Step 3 · manual step 6–8

   Screw 4 brackets (103717) onto the back rail; push in 2 dowels.

   Then turn 10 cam bolts (100481) into the board — check which way it faces in the manual, step 6.

   ▶ Watch this step (0:35)

4. 

   Step 4 · manual step 9–10

   Turn the frame over and press it onto the board.

   Fit the back rail between the leg pieces at the same time.

   ▶ Watch this step (0:42)

5. 

   Step 5 · manual step 11–12

   Press the 4 corner pads onto the legs. Screw the brackets tight.

   Pads 10006536 (A) and 10006543 (B). 4 screws (100347) through the brackets.

   ▶ Watch this step (0:48)

6. 

   Step 6 · manual step 13–14

   Lock with 10 cam locks, then turn the base over.

   Turn 4 cam bolts (118331) into the board — bag 2 starts here.

   ▶ Watch this step (0:55)

7. 

   Step 7 · manual step 15–17

   Cabinet: 4 cam bolts (118331) into the sides, 4 dowels into the rails.

   Stand the 2 rails on one side panel and lock them with 2 cam locks.

   ▶ Watch this step (1:02)

8. 

   Step 8 · manual step 18–19

   Tip it up and fit the second side panel.

   Lock it with 2 cam locks (122332), turned clockwise.

   ▶ Watch this step (1:10)

9. 

   Step 9 · manual step 20–22

   Push in 10 dowels and lower the cabinet onto the base.

   Lock it to the base with 4 cam locks — the bolts in the board go into the sides.

   ▶ Watch this step (1:17)

10. 

    Step 10 · manual step 23

    Slide the back panel down into the grooves.

    Use the plain back panel here — the grooved one is for the glass top unit.

    ▶ Watch this step (1:25)

11. 

    Step 11 · manual step 24–26

    Turn 4 cam bolts (118331) into the top. Fit it and lock it.

    4 cam locks in the sides, turned clockwise.

    ▶ Watch this step (1:30)

12. 

    Step 12 · manual step 27–29

    Fix the back with 8 plugs, 8 pins and 8 clips.

    Plugs 10075558 + pins 10051084; clips 10093081 + 10093082. Bag 3: 4 cam bolts (118331) into the top.

    ▶ Watch this step (1:37)

13. 

    Step 13 · manual step 30–32

    Glass top unit: 4 cam bolts into the glass sides, 4 dowels into the rails.

    Stand the 2 rails on one glass side and lock them with 2 cam locks.

    ▶ Watch this step (1:45)

14. 

    Step 14 · manual step 33–34

    Tip it up and fit the second glass side.

    Lock it with 2 cam locks, turned clockwise.

    ▶ Watch this step (1:52)

15. 

    Step 15 · manual step 35–40

    Join the 3 crown pieces and fix them to the top panel.

    2 dowels, 2 cam bolts (118331), 2 cam locks; then 5 screws (109060) with washers (114869) — see the manual, steps 38–40.

    ▶ Watch this step (1:58)

16. 

    Step 16 · manual step 41–44

    Turn 4 cam bolts into the top. Push 6 dowels in and fit the top.

    Lock it with 4 cam locks (122332).

    ▶ Watch this step (2:07)

17. 

    Step 17 · manual step 45–48

    Lay it on its front and slide in the grooved back panel.

    Fix it with 8 plugs + pins and 8 clips. Then push 6 dowels into the bottom edges.

    ▶ Watch this step (2:15)

18. 

    Step 18 · manual step 49–50

    With 2 people, lift the glass unit onto the cabinet.

    Lock it with 4 cam locks (122332) — the bolts in the cabinet top go into the glass sides.

    ▶ Watch this step (2:24)

19. 

    Step 19 · manual step 51–52

    Fix the cabinet to the wall with the 2 brackets (106989).

    Screw 109049 + washer 100823 into the top. Wall screws are not included — use ones that suit your wall.

    ▶ Watch this step (2:31)

20. 

    Step 20 · manual step 53–54

    Press in 16 shelf supports (131372). Lay in the 4 shelves.

    2 shelves in the glass unit, 2 in the cabinet.

    ▶ Watch this step (2:39)

21. 

    Step 21 · manual step 55–56

    Lay the 4 doors face down and screw on the hinges.

    Hinges 10031752 on two doors, 146884 on the other two — see the manual, steps 55–56.

    ▶ Watch this step (2:46)

22. 

    Step 22 · manual step 57

    Clip the doors onto the hinge plates.

    Then tighten the 8 hinge screws with the Phillips screwdriver.

    ▶ Watch this step (2:52)

23. 

    Step 23 · manual step 58–60

    Fit the 2 handles (10006275) and the 2 knobs (10006309).

    Screws 151743 for the handles, 119976 for the knobs. Stick 4 bumpers (107091) on the right-hand doors — see step 60.

    ▶ Watch this step (2:59)