IKEA · Cabinets & Wardrobes
How to assemble IKEA LACK TV Unit
Step-by-step IKEA LACK TV Unit assembly: 12 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2248458-3).
- 12 illustrated steps
- 10 steps in the manual
- 2:06 video
- 120×35×36 cm

What you need
Tools
- Flat-head screwdriver
- Phillips screwdriver
- Allen key (included)
You’ll need: flat-head and Phillips screwdrivers and a pencil.
Hardware in the box
| Part no. (as printed in the manual) | Qty |
|---|---|
| 104323 | 8× |
| 115312 | 4× |
| 130620 | 4× |
| 100372 | 4× |
| 101343 | 4× |
| 115753 | 2× |
| 103693 | 2× |
Step-by-step assembly

Step 1
Push a dowel (101343) into the top of each leg.
4 legs, 1 dowel each.

Step 2
Put the shelf onto the legs and fix it with 4 screws (104323).
Turn the screws in with the Allen key (100092).

Step 3
Lay the top upside down on a rug and screw in 4 cam bolts (115312).
Turn them in all the way, near the ends.

Step 4
Press the two side blocks down onto the cam bolts.
The cam lock holes face inwards.

Step 5
Insert 4 cam locks (130620) and turn them clockwise.
Use the flat-head screwdriver. 2 in each side block.

Step 6
Screw the 2 wall brackets (115753) to the top with 4 screws (100372).
On the back edge (facing you here), next to each side block. Use the Phillips screwdriver.

Step 7
Turn the shelf over and place it on the side blocks.
Legs pointing up.

Step 8 · manual step 7
Fix the shelf with 4 screws (104323).
Through the shelf into the side blocks, with the Allen key.

Step 9
Turn the unit the right way up.

Step 10 · manual step 8
Place the unit against the wall and mark through the 2 brackets.
Use a pencil to mark the wall through the bracket holes.

Step 11 · manual step 9
Move the unit away and drive 2 screws into the wall at the marks.
Wall screws are not included — use ones suited to your wall. Leave the heads out a little.

Step 12 · manual step 10
Push the unit back and hook the brackets on with the 2 plates (103693).
Tighten the wall screws, then push on the 2 covers (115754).
Tips & safety
- Always fix the TV unit to the wall. Furniture tip-over can cause serious or fatal crushing injuries. Wall screws are not included — ask a specialist if unsure.
- Assemble on a soft surface. The manual shows working on a rug — a hard floor can damage the parts.
Official instructions
This guide follows IKEA’s official assembly instructions (AA-2248458-3). Keep the printed manual to hand — if anything differs, the manual is right.



