IKEA · Cabinets & Wardrobes

How to assemble IKEA IVÖSJÖN Sink Base Cabinet with Sliding Doors

Step-by-step IKEA IVÖSJÖN Sink Base Cabinet with Sliding Doors assembly: 10 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2521543-4).

  • 10 illustrated steps
  • 12 steps in the manual
  • 1:52 video
  • 50×33×57 cm
IKEA IVÖSJÖN Sink Base Cabinet with Sliding Doors, assembled

What you need

Tools

No tools needed.

Hardware in the box

Part no. (as printed in the manual)Qty
—4×

Step-by-step assembly

  1. Step 1: Press frame A down onto the 4 feet. — IKEA IVÖSJÖN assembly

    Step 1

    Press frame A down onto the 4 feet.

    Stand the feet on the rug. Each corner clicks into place.

  2. Step 2: Click the 4 long posts into the corners of frame A. — IKEA IVÖSJÖN assembly

    Step 2

    Click the 4 long posts into the corners of frame A.

    Push each one straight down until it clicks.

  3. Step 3: Fit the 2 side panels with the circle between the posts. — IKEA IVÖSJÖN assembly

    Step 3 · manual step 3–4

    Fit the 2 side panels with the circle between the posts.

    Set the lower edge into the groove (click), then press the panel upright into the posts until it clicks.

  4. Step 4: Press frame B onto the posts. — IKEA IVÖSJÖN assembly

    Step 4 · manual step 5

    Press frame B onto the posts.

    All 4 corners click into place.

  5. Step 5: Click the 4 short posts into frame B. — IKEA IVÖSJÖN assembly

    Step 5 · manual step 6

    Click the 4 short posts into frame B.

  6. Step 6: Fit the 2 plain side panels the same way. — IKEA IVÖSJÖN assembly

    Step 6 · manual step 7–8

    Fit the 2 plain side panels the same way.

    Lower edge into the groove (click), then press upright into the posts.

  7. Step 7: Press frame C onto the top posts. — IKEA IVÖSJÖN assembly

    Step 7 · manual step 9

    Press frame C onto the top posts.

    Push down until all 4 corners click.

  8. Step 8: Press the 4 caps into the corners of the top. — IKEA IVÖSJÖN assembly

    Step 8 · manual step 10

    Press the 4 caps into the corners of the top.

    Push each one in until it clicks.

  9. Step 9: Fit the first door into the rear grooves. — IKEA IVÖSJÖN assembly

    Step 9 · manual step 11

    Fit the first door into the rear grooves.

    Bend it slightly: push the top edge up into the top groove, then let the bottom drop into the bottom groove.

  10. Step 10: Fit the second door into the front grooves. — IKEA IVÖSJÖN assembly

    Step 10 · manual step 12

    Fit the second door into the front grooves.

    The same way — top edge up first, then down into the bottom groove.

Tips & safety

  • Open back for the pipes The cabinet has no back panel, and frames A, B and C have a U-shaped cut-out at the back for the sink’s waste pipe.
  • Sliding doors Each door runs in its own groove — the front one and the rear one slide past each other.

Official instructions

This guide follows IKEA’s official assembly instructions (AA-2521543-4). Keep the printed manual to hand — if anything differs, the manual is right.

Open the official PDF manual

More guides: Cabinets & Wardrobes