IKEA · Cabinets & Wardrobes

How to assemble IKEA IVÖSJÖN Mirror Cabinet with 1 Door

Step-by-step IKEA IVÖSJÖN Mirror Cabinet with 1 Door assembly: 11 illustrated steps, an animated video, the hardware list and the tools you need — following the official instructions (AA-2738425-1).

  • 11 illustrated steps
  • 9 steps in the manual
  • 2:01 video
  • 44×15×59 cm
IKEA IVÖSJÖN Mirror Cabinet with 1 Door, assembled

What you need

Tools

  • Flat-head screwdriver
  • Spirit level

You’ll need: a screwdriver, a pencil, a spirit level and a tape measure.

Hardware in the box

Part no. (as printed in the manual)Qty
1942162×
not incl.4×

Step-by-step assembly

  1. Step 1: Slide the 3 shelves into the back panel. — IKEA IVÖSJÖN assembly

    Step 1

    Slide the 3 shelves into the back panel.

    The 2 shelves A go in the upper rails, the narrower shelf B at the bottom.

  2. Step 2: Push side pieces L and R onto the lower part. — IKEA IVÖSJÖN assembly

    Step 2

    Push side pieces L and R onto the lower part.

    L on the left, R on the right — they wrap under the bottom shelf.

  3. Step 3: Fit the 2 upper side pieces: in, then press down to click. — IKEA IVÖSJÖN assembly

    Step 3

    Fit the 2 upper side pieces: in, then press down to click.

    The hinge piece goes on the side the door should open from — here the left. Right side: see the manual, p. 11.

  4. Step 4: Press the top on until it clicks. — IKEA IVÖSJÖN assembly

    Step 4

    Press the top on until it clicks.

  5. Step 5: Hold it level against the wall. Mark the 2 keyholes. — IKEA IVÖSJÖN assembly

    Step 5

    Hold it level against the wall. Mark the 2 keyholes.

    Use a spirit level on top, then mark through the keyholes with a pencil.

  6. Step 6: Screw 2 screws into the wall at the marks. — IKEA IVÖSJÖN assembly

    Step 6

    Screw 2 screws into the wall at the marks.

    Leave the heads standing out. Wall screws are not included — use ones that suit your wall.

  7. Step 7: Hang the cabinet on the screws and push it down. — IKEA IVÖSJÖN assembly

    Step 7 · manual step 6

    Hang the cabinet on the screws and push it down.

    The screw heads go into the keyholes at the back.

  8. Step 8: Fix the bottom with 2 more screws. — IKEA IVÖSJÖN assembly

    Step 8 · manual step 7

    Fix the bottom with 2 more screws.

    Through the 2 holes in the back panel, just under the lower shelf.

  9. Step 9: Hook the door onto the 2 hinges on the left. — IKEA IVÖSJÖN assembly

    Step 9 · manual step 8

    Hook the door onto the 2 hinges on the left.

    Hold it open and slide it onto the hinges.

  10. Step 10: Push in the 2 hinge pins (194216) and turn them until they click. — IKEA IVÖSJÖN assembly

    Step 10 · manual step 9

    Push in the 2 hinge pins (194216) and turn them until they click.

    The top pin goes in from below, the bottom pin from above.

  11. Step 11: Close the door. — IKEA IVÖSJÖN assembly

    Step 11 · manual step 9

    Close the door.

Tips & safety

  • Always fix IVÖSJÖN to the wall. Wall screws and plugs are not included. Use screws that suit your wall — if unsure, ask a specialist.
  • Want the door hinged on the right? Swap the 2 upper side pieces in step 3 — see the manual, p. 11.

Official instructions

This guide follows IKEA’s official assembly instructions (AA-2738425-1). Keep the printed manual to hand — if anything differs, the manual is right.

Open the official PDF manual

More guides: Cabinets & Wardrobes