How to assemble IKEA IVÖSJÖN Cabinet with Doors

Step-by-step assembly

1. 

   Step 1

   Push the 4 feet into the corners of frame A.

   Push them up from underneath until they sit firmly.

   ▶ Watch this step (0:16)

2. 

   Step 2

   Click 4 posts into the corners of frame A.

   Push each one straight down until it clicks.

   ▶ Watch this step (0:24)

3. 

   Step 3 · manual step 3–4

   Fit 3 side panels between the posts.

   Set each panel into the frame’s groove (click), then press it upright into the posts until it clicks.

   ▶ Watch this step (0:32)

4. 

   Step 4 · manual step 5

   Click a door onto the front edge of each B frame.

   Lay both B frames upside down. Push in the hinge pin on one side, then click in the other.

   ▶ Watch this step (0:43)

5. 

   Step 5 · manual step 6

   Turn each frame over, flip the door up and slide it in underneath.

   Push the door in until it clicks. Repeat for the second B frame.

   ▶ Watch this step (0:51)

6. 

   Step 6 · manual step 7

   Press frame B onto the posts.

   All 4 corners click into place. The door stays tucked in under the frame.

   ▶ Watch this step (1:02)

7. 

   Step 7 · manual step 8

   Click 4 more posts into frame B.

   ▶ Watch this step (1:09)

8. 

   Step 8 · manual step 9

   Fit 3 side panels, the same as in steps 3–4.

   ▶ Watch this step (1:15)

9. 

   Step 9 · manual step 10

   Press the second frame B onto the posts.

   ▶ Watch this step (1:25)

10. 

    Step 10 · manual step 11

    Click 4 more posts into the top frame B.

    ▶ Watch this step (1:31)

11. 

    Step 11 · manual step 12

    Fit the last 3 side panels.

    ▶ Watch this step (1:38)

12. 

    Step 12 · manual step 13

    Fit the third door to frame C and slide it in underneath.

    The same way as steps 5–6 — push it in until it clicks.

    ▶ Watch this step (1:47)

13. 

    Step 13 · manual step 14

    Press frame C onto the top posts.

    Push down until it clicks all round.

    ▶ Watch this step (1:58)

14. 

    Step 14 · manual step 15

    Press the 4 caps into the corners of the top.

    Push each one in until it clicks.

    ▶ Watch this step (2:05)

15. 

    Step 15 · manual step 16

    Pull each door out and swing it down to close it.

    Each door hangs from the frame above it.

    ▶ Watch this step (2:12)

16. 

    Step 16 · manual step 17

    Clip the 2 wall clips onto the back of frame C.

    Push them up onto the back edge of the top frame.

    ▶ Watch this step (2:21)

17. 

    Step 17 · manual step 18

    Push the cabinet against the wall and mark the 2 clips.

    Draw a pencil line along the top of each clip.

    ▶ Watch this step (2:28)

18. 

    Step 18 · manual step 19–20

    Screw the 2 clips to the wall at the marks.

    175 mm apart. Use screws with a flat underside (not countersunk) that suit your wall — not included.

    ▶ Watch this step (2:37)

19. 

    Step 19 · manual step 21

    Hook the cabinet onto the wall clips.

    Push it back to the wall and press the top down into both clips.

    ▶ Watch this step (2:47)