How to assemble IKEA IDANÄS Wardrobe

Step-by-step assembly

1. 

   Step 1 · manual step 1–2

   Join the bottom panel to both side panels.

   The connectors are pre-fitted: slide them into the keyholes and press down until they click.

   ▶ Watch this step (0:22)

2. 

   Step 2 · manual step 3–4

   Push 4 dowels (101352) into the top rail. Fit it between the sides.

   The grooved edge faces the inside of the wardrobe.

   ▶ Watch this step (0:29)

3. 

   Step 3 · manual step 5

   Press the top onto the sides until the 6 connectors click.

   Make sure it sits at 90° to the sides.

   ▶ Watch this step (0:36)

4. 

   Step 4 · manual step 6–7

   Join the rail and the top with 2 angle brackets (102553).

   4 screws (100347) — 2 into the top, 2 into the rail.

   ▶ Watch this step (0:42)

5. 

   Step 5 · manual step 8

   Fit the support block under the bottom panel.

   1 dowel (101352) and 1 screw (100214) — tighten with the Allen key 100001.

   ▶ Watch this step (0:49)

6. 

   Step 6 · manual step 9–12

   Click in the fixed divider, then the fixed shelf.

   Slide the connectors into the keyholes and press down until they click.

   ▶ Watch this step (0:56)

7. 

   Step 7 · manual step 13–15

   Hang the clothes rail on 2 eye bolts (112805).

   They screw into the barrel nuts (10044657) in the top — Allen key 100002.

   ▶ Watch this step (1:02)

8. 

   Step 8 · manual step 16

   Turn it onto its side and slide in the 2 back panels.

   They run in the grooves of the sides — see the manual, step 16.

   ▶ Watch this step (1:10)

9. 

   Step 9 · manual step 17–18

   Lay it on its front. Fix the back with 7 plugs.

   Sleeves 151706 and pins 151705, pressed in by hand.

   ▶ Watch this step (1:17)

10. 

    Step 10 · manual step 19

    Join the two back panels with 10 clips (10093081).

    Then press on the caps (10093082).

    ▶ Watch this step (1:24)

11. 

    Step 11 · manual step 20–22

    Build the leg frame.

    Screw a bracket (102553) onto each long rail (100347), then click the rails into both leg sections.

    ▶ Watch this step (1:30)

12. 

    Step 12 · manual step 23–24

    Push 4 dowels (101352) into the sides. Fit the leg frame.

    Fix it with 4 long bolts (10093458) and the Allen key 100001.

    ▶ Watch this step (1:38)

13. 

    Step 13 · manual step 25–26

    Screw the brackets to the bottom. Screw in the 5 adjustable feet.

    2 screws (100347) for the brackets; feet 131399 in the 4 legs and the support block.

    ▶ Watch this step (1:46)

14. 

    Step 14 · manual step 27

    Screw the 2 wall brackets (106989) to the top.

    Screws 109049 with washers 100823.

    ▶ Watch this step (1:53)

15. 

    Step 15 · manual step 28

    Raise the wardrobe with two people.

    Level it by turning the feet with the spanner (131398).

    ▶ Watch this step (1:59)

16. 

    Step 16 · manual step 29–32

    Fix it to the wall through the 2 brackets.

    Screws 109567 + washers 100823. Plugs and drill bit depend on your wall — see step 30.

    ▶ Watch this step (2:06)

17. 

    Step 17 · manual step 33–34

    Push in 12 shelf pins (131372) and lay on the 3 shelves.

    ▶ Watch this step (2:14)

18. 

    Step 18 · manual step 35

    Clip the 2 door tracks into the top and bottom grooves.

    ▶ Watch this step (2:22)

19. 

    Step 19 · manual step 36–37

    Lay the 4 door panels face-down. Join them in pairs with 6 hinges.

    Hinges 10042027, 4 screws (150769) each.

    ▶ Watch this step (2:28)

20. 

    Step 20 · manual step 38–39

    Screw on the 6 cabinet hinges and the 4 pivot fittings.

    175136 at the top, 152517 below. Pins 192158 hold the pivots — see steps 38–39.

    ▶ Watch this step (2:35)

21. 

    Step 21 · manual step 40–41

    Fit a straightening strip (10055263) into each door panel.

    5 inserts (10075558) and 5 pins (10051084) per strip.

    ▶ Watch this step (2:43)

22. 

    Step 22 · manual step 42

    Hang each door pair: screw its 3 hinges to the side panel.

    The 175136 hinges go at the top.

    ▶ Watch this step (2:50)

23. 

    Step 23 · manual step 43

    Screw on the 4 knobs (10041120).

    1 screw (119976) per knob, from the back.

    ▶ Watch this step (2:57)

24. 

    Step 24 · manual step 44–45

    Fit the 2 guides (10050550). Close the doors and click the pivots in.

    The pivots click into the top and bottom tracks — see step 45.

    ▶ Watch this step (3:03)