How to assemble IKEA IDANÄS Cabinet with Bi-Fold Glass Doors

Step-by-step assembly

1. 

   Step 1 · manual step 1–3

   Drawer divider: push in 2 dowels (101352), then screw a runner onto each face.

   2 screws (100347) per runner — 10044743 on one face, 10044733 on the other.

   ▶ Watch this step (0:21)

2. 

   Step 2 · manual step 4–7

   Fix the centre leg to the bottom panel, then the bottom to the divider.

   A dowel (101352) in the leg; 1 screw (100214) each — Allen key 100001.

   ▶ Watch this step (0:28)

3. 

   Step 3 · manual step 8–9

   Fit the drawer shelf onto the divider dowels. Fix it with 1 screw (100214).

   ▶ Watch this step (0:37)

4. 

   Step 4 · manual step 10–11

   Screw a drawer runner onto each side panel.

   2 screws (100347) per runner — 10044743 on one side, 10044733 on the other.

   ▶ Watch this step (0:42)

5. 

   Step 5 · manual step 12–14

   Hook both side panels onto the drawer section, then the tall divider.

   Slide the connectors into the keyholes and press down — 4 per side.

   ▶ Watch this step (0:48)

6. 

   Step 6 · manual step 15–16

   Push 4 dowels (101352) into the rail ends. Fit the rail between the sides.

   It goes at the front edge of the top end.

   ▶ Watch this step (0:57)

7. 

   Step 7 · manual step 17–19

   Press the top on (6 connectors). Screw the rail to the divider and clip in the tracks.

   1 screw (110907) — two people for the top. Door tracks 192163 / 192156.

   ▶ Watch this step (1:03)

8. 

   Step 8 · manual step 20

   Turn the cabinet onto its top. Slide in the 2 back panels.

   Two people. The back panels slide down the grooves from the bottom end.

   ▶ Watch this step (1:12)

9. 

   Step 9 · manual step 21–22

   Fix the back with 8 plugs (151708 + pins 151707), then 8 clips (10093081).

   Press a cap (10093082) onto each clip.

   ▶ Watch this step (1:19)

10. 

    Step 10 · manual step 23–25

    Build the leg frame.

    Screw an angle bracket (102553) onto each long rail (100347), then hook the rails into both leg sections.

    ▶ Watch this step (1:26)

11. 

    Step 11 · manual step 26–29

    Push 4 dowels (101352) into the sides. Fit the leg frame, legs up.

    Fix it with 4 long screws (10093458), then screw the 2 brackets to the bottom (100347).

    ▶ Watch this step (1:33)

12. 

    Step 12 · manual step 30

    Screw in the 5 feet (131399). Turn the cabinet over and stand it up.

    Two people.

    ▶ Watch this step (1:41)

13. 

    Step 13 · manual step 31–32

    Fit the 2 wall spacers (150688) and screw their knobs (150689) on.

    Turn the knobs to set the distance to the wall.

    ▶ Watch this step (1:50)

14. 

    Step 14 · manual step 33–37

    Level the feet (131398). Fix the cabinet to the wall.

    Mark, drill, then 2 screws (147968) with washers (126916). Plugs depend on your wall — see step 36. Press the caps (10005905) on.

    ▶ Watch this step (1:56)

15. 

    Step 15 · manual step 38–39

    Lay the 4 glass doors face-down. Join them in pairs with 4 hinges (10042027).

    4 screws (150769) per hinge.

    ▶ Watch this step (2:04)

16. 

    Step 16 · manual step 40–41

    Screw on the 4 cabinet hinges and the 4 pivot fittings.

    Hinges 152517 / 10080852 — see step 40. Pivot fittings 10050531 / 10050552 with pins 192158.

    ▶ Watch this step (2:10)

17. 

    Step 17 · manual step 42–43

    Fit a door strip (10074857) along each door pair.

    5 inserts (10075558) and 5 pins (10051084) per strip.

    ▶ Watch this step (2:17)

18. 

    Step 18 · manual step 44

    Hang each door pair: fix its 2 hinges to the side panel.

    Two people — support the doors while you do it.

    ▶ Watch this step (2:22)

19. 

    Step 19 · manual step 45

    Screw on the 4 door knobs (10041120).

    1 screw (119976) per knob, from the back.

    ▶ Watch this step (2:29)

20. 

    Step 20 · manual step 46–47

    Click the pivot fittings into the tracks. Fit the 2 guides (10050549).

    The guides go under the top rail, with pins 192158 — see step 47.

    ▶ Watch this step (2:34)

21. 

    Step 21 · manual step 48–49

    Push in 16 shelf supports (10051660) and lay in the 4 shelves.

    ▶ Watch this step (2:40)

22. 

    Step 22 · manual step 50–53

    Drawers: slide the bottom into the grooves, then fold the sides up.

    The back and sides come joined together — see steps 50–53. Build both drawers.

    ▶ Watch this step (2:47)

23. 

    Step 23 · manual step 54–56

    Hook the fronts on. Clip in the fittings (10047244) and fit the knobs.

    2 fittings per drawer; 1 screw (119976) per knob.

    ▶ Watch this step (2:54)

24. 

    Step 24 · manual step 57–58

    Pull the runners out, set each drawer on them and press it down.

    Push the drawers in and close the doors.

    ▶ Watch this step (3:02)