How to assemble IKEA HEMNES Mirror Cabinet with 2 Doors

Step-by-step assembly

1. 

   Step 1

   Screw 4 cam bolts (118331) into the side panels.

   2 in each panel. Turn them in by hand.

   ▶ Watch this step (0:18)

2. 

   Step 2

   Screw 2 hinge plates (118692) onto each side panel.

   The screws are already in the plates.

   ▶ Watch this step (0:25)

3. 

   Step 3

   Push 4 dowels (101345) into the ends of the rail and the shelf.

   One in each end.

   ▶ Watch this step (0:32)

4. 

   Step 4

   Stand the right side on its edge. Fit the rail and the shelf.

   Lock them with 2 cam locks (110630) — turn them clockwise.

   ▶ Watch this step (0:38)

5. 

   Step 5

   Fit the left side and lock it with 2 cam locks (110630).

   Turn them clockwise with the flat-head screwdriver.

   ▶ Watch this step (0:47)

6. 

   Step 6

   Push 6 dowels (101345) into the ends of the side panels.

   2 in each bottom end, 1 in each top end. Check which way the bottom panel goes — see the manual, step 6.

   ▶ Watch this step (0:56)

7. 

   Step 7

   Fit the bottom panel with 4 screws (157907).

   Tighten them with the Allen key (100006).

   ▶ Watch this step (1:03)

8. 

   Step 8

   Unfold the back panel and slide it into the grooves.

   Push it in all the way to the bottom panel.

   ▶ Watch this step (1:11)

9. 

   Step 9

   Fit the top with 5 screws (157907).

   Tighten them with the Allen key.

   ▶ Watch this step (1:17)

10. 

    Step 10

    Stick a spacer (110646) on the back with an adhesive pad (108064).

    In the middle, on the fold line, behind the fixed shelf.

    ▶ Watch this step (1:25)

11. 

    Step 11 · manual step 10

    Turn the cabinet over onto its back.

    Two people.

    ▶ Watch this step (1:32)

12. 

    Step 12 · manual step 11

    Screw a wall bracket (153646) inside each side at the top.

    2 screws (157673) per bracket.

    ▶ Watch this step (1:38)

13. 

    Step 13 · manual step 11

    Stand the cabinet up.

    Two people.

    ▶ Watch this step (1:46)

14. 

    Step 14 · manual step 12

    Hold it against the wall and level it. Mark the 2 bracket holes.

    Two people. Mark through the holes in the brackets with a pencil.

    ▶ Watch this step (1:50)

15. 

    Step 15 · manual step 13

    Move it away. Screw the 2 spacers (110646) onto the wall.

    Wall screws are not included — use round-head screws, not countersunk.

    ▶ Watch this step (1:59)

16. 

    Step 16 · manual step 14

    Hang the cabinet and fit the 2 plates (153647) in the brackets.

    Adjust the height with a screwdriver, then clip on the covers (115754).

    ▶ Watch this step (2:07)

17. 

    Step 17 · manual step 15

    Lay the doors face down. Screw on the 4 hinges (123751).

    2 hinges per door, on the outer edge.

    ▶ Watch this step (2:16)

18. 

    Step 18 · manual step 16

    Clip the hinges onto the plates, then tighten the screws.

    Two people.

    ▶ Watch this step (2:24)

19. 

    Step 19 · manual step 17

    Push in 12 sleeves (101530), then the 12 shelf pins (104171).

    4 for each shelf. Heights: see the manual, step 17.

    ▶ Watch this step (2:33)

20. 

    Step 20 · manual step 18

    Put in the 3 shelves.

    Tilt each one in, then lay it on its 4 pins.

    ▶ Watch this step (2:41)

21. 

    Step 21 · manual step 19–20

    Stick the 2 bumpers (107091) on the front edge of the shelf.

    One behind each door, near the middle.

    ▶ Watch this step (2:50)

22. 

    Step 22 · manual step 20

    Close the doors.

    ▶ Watch this step (2:56)