How to assemble IKEA HAUGA Wardrobe with Sliding Doors

Step-by-step assembly

1. 

   Step 1

   Push 4 dowels (101345) into the two halves of the fixed shelf.

   2 in the inner edge of each half, the edge that meets the divider.

   ▶ Watch this step (0:20)

2. 

   Step 2 · manual step 2–3

   Put the divider on its edge. Fit one shelf half with 2 connectors.

   Push the 2 connectors (10050827) through the divider, then turn 2 cam locks (113434) clockwise.

   ▶ Watch this step (0:26)

3. 

   Step 3 · manual step 4

   Fit the other shelf half onto the connectors and lock 2 cam locks.

   Cam locks 113434 — turn them clockwise with the screwdriver.

   ▶ Watch this step (0:34)

4. 

   Step 4 · manual step 5

   Screw the 2 wall brackets (106989) onto the top panel.

   1 screw (109049) with a washer (100823) each, Phillips screwdriver.

   ▶ Watch this step (0:40)

5. 

   Step 5 · manual step 6

   Fit the top panel onto the end of the divider. Press until it clicks.

   The brackets go at the back edge. 3 click fittings.

   ▶ Watch this step (0:47)

6. 

   Step 6 · manual step 7

   Fit the bottom panel onto the other end. Press until it clicks.

   3 click fittings.

   ▶ Watch this step (0:54)

7. 

   Step 7 · manual step 8–9

   Lay on both side panels and press them down until they click.

   9 click fittings per side. The curved corner goes at the top front.

   ▶ Watch this step (1:01)

8. 

   Step 8 · manual step 10–11

   Slide the 2 back panels into the grooves of the side panels.

   Two people: one panel at a time, all the way along.

   ▶ Watch this step (1:09)

9. 

   Step 9 · manual step 12

   Push 18 plugs (151706) through the back panels.

   Into the holes over the top, bottom, shelf and divider.

   ▶ Watch this step (1:17)

10. 

    Step 10 · manual step 13–14

    Fit 14 clips along the edges, then push 18 pins (151705) into the plugs.

    Clips 10093081 + 10093082 — positions in the manual, step 13.

    ▶ Watch this step (1:24)

11. 

    Step 11 · manual step 15

    Push 6 dowels (101345) into the 2 plinth rails and fit them at the bottom.

    ▶ Watch this step (1:32)

12. 

    Step 12 · manual step 16–17

    Press the 6 feet into the rails.

    4 corner feet (10040039) at the ends, 2 feet (153548) in the middle.

    ▶ Watch this step (1:40)

13. 

    Step 13 · manual step 18

    Raise the wardrobe with two people and stand it against the wall.

    Mark the 2 bracket slots on the wall with a pencil.

    ▶ Watch this step (1:47)

14. 

    Step 14 · manual step 19–20

    Pull the wardrobe out, drill 2 holes at the marks and push in the plugs.

    Plugs 121714 suit most walls. Drill size and solid wood: see the manual, step 20.

    ▶ Watch this step (1:55)

15. 

    Step 15 · manual step 21

    Push it back and screw it to the wall through the 2 brackets.

    Screws 109048 + washers 100823. Then tighten the 2 bracket screws (109049), step 22.

    ▶ Watch this step (2:01)

16. 

    Step 16 · manual step 23–24

    Push 4 dowels (101345) into the sides, then press the top board on.

    Push the dowels in by hand — no hammer.

    ▶ Watch this step (2:06)

17. 

    Step 17 · manual step 25

    Press the 2 bottom tracks (10047004) into the grooves of the bottom panel.

    Start at one end and press them in bit by bit.

    ▶ Watch this step (2:14)

18. 

    Step 18 · manual step 26

    Press the 2 top tracks (10046991) into the grooves under the top panel.

    The same way, from one end to the other.

    ▶ Watch this step (2:19)

19. 

    Step 19 · manual step 27–28

    Screw on 4 rail holders (10042365), then drop in the 2 clothes rails.

    1 screw (146113) per holder.

    ▶ Watch this step (2:24)

20. 

    Step 20 · manual step 29

    Press 8 small door stops (115339) into the side panels.

    Near the front edge, top and bottom of each side.

    ▶ Watch this step (2:32)

21. 

    Step 21 · manual step 30–31

    Fit 2 top guides (192157) and 2 rollers (150521) to each door.

    Lock each fitting with 2 pins (192158). Lay the doors face-down.

    ▶ Watch this step (2:38)

22. 

    Step 22 · manual step 32–33

    Hang the back door first, then the front door.

    Top into the top track, bottom onto the bottom track, then press the 2 locks until they click.

    ▶ Watch this step (2:46)

23. 

    Step 23 · manual step 34–35

    Press a door stop (192161) in at the top and bottom, then lock with pins.

    Slide the doors aside first. Exact positions and pins (192158): see the manual, steps 34–35.

    ▶ Watch this step (2:55)

24. 

    Step 24 · manual step 36

    Screw a knob (10051940) onto each door.

    1 screw (119976) per knob, from the back of the door.

    ▶ Watch this step (3:03)