How to assemble IKEA HAUGA Nightstand

Step-by-step assembly

1. 

   Step 1

   Screw the cabinet runners onto both side panels.

   IKEA CL on the left side, IKEA CR on the right — 2 screws (146114) each.

   ▶ Watch this step (0:18)

2. 

   Step 2 · manual step 2–3

   Stand one side on its edge. Click in the bottom and top shelves.

   Push the 2 fittings into the holes, slide the shelf in and press down until it clicks.

   ▶ Watch this step (0:25)

3. 

   Step 3 · manual step 4

   Fit the other side panel and press it down until it clicks.

   2 click fittings at each shelf.

   ▶ Watch this step (0:34)

4. 

   Step 4 · manual step 5

   Slide the back panel into the grooves in the side panels.

   Push it in from the bottom end, all the way.

   ▶ Watch this step (0:40)

5. 

   Step 5 · manual step 6

   Push 2 plugs (151708) through the back, then press in 2 pins (151707).

   They fix the back panel to the bottom shelf.

   ▶ Watch this step (0:46)

6. 

   Step 6 · manual step 7

   Fit 4 clips (10093081) and push a wedge (10093082) into each.

   Positions: see the manual, step 7.

   ▶ Watch this step (0:53)

7. 

   Step 7 · manual step 8–9

   Push 2 dowels (101345) into the plinth and fit it under the bottom shelf.

   ▶ Watch this step (1:00)

8. 

   Step 8 · manual step 10

   Push in the 4 feet.

   2 straight feet (153548) at the back, 2 T-shaped feet (10040039) at the front.

   ▶ Watch this step (1:07)

9. 

   Step 9 · manual step 11–12

   Push 2 dowels (101345) into the top rail and slide it in at the top.

   ▶ Watch this step (1:14)

10. 

    Step 10 · manual step 13

    Lock the rail with a plug (151708) and a pin (151707) at each end.

    Through the round holes in the rail.

    ▶ Watch this step (1:21)

11. 

    Step 11

    Stand the nightstand upright.

    Tip it up onto its feet and turn it round.

    ▶ Watch this step (1:28)

12. 

    Step 12

    Now the drawer.

    Build it on the rug, standing on its front.

    ▶ Watch this step (1:33)

13. 

    Step 13 · manual step 14

    Screw 4 cam bolts (118331) into the drawer front.

    2 at each end, by hand or with a Phillips screwdriver.

    ▶ Watch this step (1:37)

14. 

    Step 14 · manual step 15

    Push a dowel (101345) into each drawer side.

    ▶ Watch this step (1:43)

15. 

    Step 15 · manual step 16

    Stand both sides onto the drawer front.

    The bolts and dowels go into the holes in the ends of the sides.

    ▶ Watch this step (1:48)

16. 

    Step 16 · manual step 17

    Insert 4 cam locks (119030) and turn them clockwise.

    Use the flat-head screwdriver.

    ▶ Watch this step (1:55)

17. 

    Step 17 · manual step 18

    Slide the drawer bottom down into the grooves.

    ▶ Watch this step (2:01)

18. 

    Step 18 · manual step 19

    Fit the drawer back between the sides.

    Its groove goes over the edge of the drawer bottom (inset, manual step 19).

    ▶ Watch this step (2:06)

19. 

    Step 19 · manual step 20

    Push 4 pins (145718) through the sides into the drawer back.

    2 each side.

    ▶ Watch this step (2:12)

20. 

    Step 20 · manual step 21

    Insert 4 cam locks (119030) into the back and turn them clockwise.

    ▶ Watch this step (2:18)

21. 

    Step 21 · manual step 22

    Turn the drawer upright and fit the 2 drawer runners.

    IKEA DL left, IKEA DR right: hook on at the front, then 2 screws (146114) each.

    ▶ Watch this step (2:24)

22. 

    Step 22 · manual step 23

    Fix the knob (10052019) with 1 screw from inside the drawer.

    ▶ Watch this step (2:32)

23. 

    Step 23 · manual step 24

    Slide the drawer into the runners and push it closed.

    Tilt it slightly to get the wheels in.

    ▶ Watch this step (2:38)