How to assemble IKEA FABRIKÖR Glass-Door Cabinet

Step-by-step assembly

1. 

   Step 1

   Screw an adjustable foot (10036516) into each of the 4 legs.

   ▶ Watch this step (0:16)

2. 

   Step 2

   Join the legs in pairs with the 2 rails. 4 bolts (130419).

   A lock washer (100850) goes into each leg hole first. Use Allen key 130445.

   ▶ Watch this step (0:23)

3. 

   Step 3

   Lower one pair onto the other so the rail notches lock together.

   ▶ Watch this step (0:32)

4. 

   Step 4

   Put the base frame on top of the legs.

   Line up the holes in its corners with the legs — see the manual, page 6.

   ▶ Watch this step (0:38)

5. 

   Step 5

   Stand the post with the hinges on its corner. Fix it with 1 bolt (130419).

   Check which corner and which way round — see the manual, step 5.

   ▶ Watch this step (0:44)

6. 

   Step 6

   Fit two more posts the same way, 1 bolt each.

   Each post has its own corner — see the manual, step 6.

   ▶ Watch this step (0:51)

7. 

   Step 7

   Fit the last post with 1 bolt.

   ▶ Watch this step (0:58)

8. 

   Step 8

   Tighten all 8 bolts at the post feet and the 4 bolts in the legs.

   Two bolts per post. Use Allen key 130445.

   ▶ Watch this step (1:04)

9. 

   Step 9

   Lower the back glass panel into the grooves of the back posts.

   Use the right panel — see the manual, step 9.

   ▶ Watch this step (1:12)

10. 

    Step 10

    Push in the 8 tabs on the back posts to hold the glass.

    ▶ Watch this step (1:19)

11. 

    Step 11 · manual step 11–12

    Fit both side glass panels the same way, 8 tabs each.

    ▶ Watch this step (1:25)

12. 

    Step 12 · manual step 13

    Put the top on. Fix it with 7 bolts (130419).

    The last bolt is for the wall fixing.

    ▶ Watch this step (1:34)

13. 

    Step 13 · manual step 14–16

    Mark the top edge on the wall. Screw the strap on 4 cm (1 ½") below.

    Pierce holes in the strap with an awl first. Use a round-head screw suited to your wall — see the manual.

    ▶ Watch this step (1:42)

14. 

    Step 14 · manual step 17

    Push the cabinet back. Bolt the strap to the top (130419).

    Leftover wall-fixing parts aren’t needed.

    ▶ Watch this step (1:52)

15. 

    Step 15 · manual step 18

    Lay the bottom panel into the base frame.

    ▶ Watch this step (2:00)

16. 

    Step 16 · manual step 19

    Turn the feet until the cabinet stands level.

    Use Allen key 100006.

    ▶ Watch this step (2:06)

17. 

    Step 17 · manual step 20

    Press a pad onto each of the 8 shelf supports (114594). Hook them into the posts.

    4 supports per shelf, all at the same height.

    ▶ Watch this step (2:12)

18. 

    Step 18 · manual step 21

    Lay the 2 glass shelves on the supports.

    ▶ Watch this step (2:20)

19. 

    Step 19 · manual step 22–23

    Hang the door: a washer (130700) on each hinge, then a hinge pin (130872).

    Two people — one holds the door. See the manual, steps 22–23.

    ▶ Watch this step (2:28)

20. 

    Step 20 · manual step 24

    Close the door. Lock it with the key (130497).

    ▶ Watch this step (2:38)