How to assemble IKEA EKET Cabinet with 4 Compartments

Step-by-step assembly

1. 

   Step 1

   Sort the four frame panels.

   Two have pegs, two have keyhole slots. The panel marked 1 is the top.

   ▶ Watch this step (0:16)

2. 

   Step 2

   Stand panel 1 on edge and slide a keyhole panel down onto it.

   The 3 pegs go into the keyhole slots — press down firmly.

   ▶ Watch this step (0:22)

3. 

   Step 3

   Push the pegs of one divider half into the shelf.

   ▶ Watch this step (0:31)

4. 

   Step 4

   Fit the other divider half on the other side of the shelf.

   ▶ Watch this step (0:38)

5. 

   Step 5

   Lower the shelf and dividers into the frame.

   The pegs drop into the keyholes in panel 1 and the side panel.

   ▶ Watch this step (0:44)

6. 

   Step 6

   Slide the second keyhole panel down onto panel 1 and the shelf.

   ▶ Watch this step (0:52)

7. 

   Step 7

   Unfold the back panel and slide it into the grooves.

   It runs in the grooves, not on top of them. Push it in up to panel 1.

   ▶ Watch this step (1:00)

8. 

   Step 8

   Slide the last peg panel down to close the frame.

   ▶ Watch this step (1:08)

9. 

   Step 9

   Stand it upright with panel 1 at the top.

   Push the back panel all the way down into the bottom groove.

   ▶ Watch this step (1:14)

10. 

    Step 10

    Fit 12 clips (10093081) around the back panel.

    Then press a wedge (10093082) into each clip.

    ▶ Watch this step (1:23)

11. 

    Step 11

    Fit legs or a suspension rail — follow its own manual.

    Legs and suspension rail are sold separately.

    ▶ Watch this step (1:32)

12. 

    Step 12

    Press 2 wall connectors (141413) into the back, just below the top.

    ▶ Watch this step (1:39)

13. 

    Step 13

    Drill through the back panel at each connector with a Ø 8 mm bit.

    Ø 8 mm = 5/16".

    ▶ Watch this step (1:46)

14. 

    Step 14

    Turn a knob (141414) onto each connector.

    Turn it clockwise.

    ▶ Watch this step (1:52)

15. 

    Step 15

    Move the cabinet to the wall.

    Turn both knobs until they touch the wall, clear of the skirting board.

    ▶ Watch this step (1:58)

16. 

    Step 16

    Screw through each plate (152651) into the wall.

    Wall screws are not included — choose screws for your wall type.

    ▶ Watch this step (2:05)

17. 

    Step 17

    Press a cover cap (152650) onto each plate and turn it to lock.

    ▶ Watch this step (2:13)

18. 

    Step 18 · manual step 17

    Done — the cabinet is fixed to the wall.

    ▶ Watch this step (2:20)