How to assemble IKEA BROR Cabinet with Doors

Step-by-step assembly

1. 

   Step 1

   Screw an adjustable foot (10082362) into each corner tube.

   4 feet — 2 on each bottom rail.

   ▶ Watch this step (0:17)

2. 

   Step 2

   Push both rails into the right side panel.

   Check which way round each rail goes — manual step 2.

   ▶ Watch this step (0:23)

3. 

   Step 3

   Fit the left side panel onto the other ends.

   ▶ Watch this step (0:30)

4. 

   Step 4

   Fix the rails with 4 screws (190230).

   Use the Allen key. Screw them in all the way.

   ▶ Watch this step (0:35)

5. 

   Step 5

   Fit the 4 corner brackets. 1 screw (190230) in each.

   Leave these screws loose for now — they’re tightened in step 25.

   ▶ Watch this step (0:41)

6. 

   Step 6

   Raise the frame upright.

   Two people.

   ▶ Watch this step (0:48)

7. 

   Step 7 · manual step 6–7

   Hook in the bottom back panel, then swing it back.

   Lock it with the flat screwdriver: push the 9 tabs into the slots.

   ▶ Watch this step (0:52)

8. 

   Step 8 · manual step 8–10

   Fit the second back panel the same way.

   Push in its 9 tabs, then fix it with 2 screws (190230) — 1 each side.

   ▶ Watch this step (1:00)

9. 

   Step 9 · manual step 11–13

   Fit the third back panel: tabs, then 2 screws (190230).

   ▶ Watch this step (1:08)

10. 

    Step 10 · manual step 14–15

    Fit the top back panel and push in its 9 tabs.

    ▶ Watch this step (1:16)

11. 

    Step 11 · manual step 16–17

    Top back: 2 screws (190230), 2 brackets (10081694).

    Fix each bracket with 2 screws (10005389). Leave all of them loose for now.

    ▶ Watch this step (1:22)

12. 

    Step 12 · manual step 18

    Lay the top upside down. Lift its 4 tabs with a screwdriver.

    ▶ Watch this step (1:30)

13. 

    Step 13 · manual step 19–20

    Hook the top on at the back, then lower the front.

    Lock it from below: push up the 3 tabs at the back with the screwdriver.

    ▶ Watch this step (1:35)

14. 

    Step 14 · manual step 21

    Fix the top with 4 bolts (10038686) from below.

    One in each corner, with the Allen key.

    ▶ Watch this step (1:43)

15. 

    Step 15 · manual step 22

    Level the cabinet: turn the feet up or down.

    Check with a spirit level on the top.

    ▶ Watch this step (1:49)

16. 

    Step 16 · manual step 23–25

    Now tighten all the loose screws.

    Brackets (10005389, Phillips), then the 190230 screws: 2 at the top, 8 lower down.

    ▶ Watch this step (1:54)

17. 

    Step 17 · manual step 26

    Lay the bottom shelf in: back edge first, then lower the front.

    ▶ Watch this step (2:02)

18. 

    Step 18 · manual step 27

    Fix the cabinet to the wall: 2 wall brackets (153647).

    They hook onto the top brackets. Wall screws and plugs are not included — use ones that suit your wall.

    ▶ Watch this step (2:07)

19. 

    Step 19 · manual step 28

    Press 16 shelf clips (10005835) into the slotted strips.

    4 per shelf — at the same height front and back, left and right.

    ▶ Watch this step (2:14)

20. 

    Step 20 · manual step 29

    Lay the 4 shelves on the clips.

    ▶ Watch this step (2:20)

21. 

    Step 21 · manual step 30

    Lock the shelves: push 16 clips (10081941) in above them.

    ▶ Watch this step (2:27)

22. 

    Step 22 · manual step 31

    Push the 2 hinge pins (150637) into the bottom shelf.

    One at each front corner.

    ▶ Watch this step (2:32)

23. 

    Step 23 · manual step 32–33

    Set the right door on its pin, then swing the top in.

    Push the hinge clip (10082029) up into the top until it clicks.

    ▶ Watch this step (2:37)

24. 

    Step 24 · manual step 34–35

    Fit the left door the same way.

    Bottom onto the pin, swing the top in and click the hinge clip (10082029) up.

    ▶ Watch this step (2:44)

25. 

    Step 25

    Doors not level at the top? Turn the feet to line them up.

    See the last page of the manual.

    ▶ Watch this step (2:51)